mac clone getting blocked by zte ont

  • Thread starter Thread starter Harmanpreet
  • Start date Start date
  • Replies Replies 10
  • Views Views 4,432
Messages
66
Location
Amritsar,Punjab
ISP
Airtel Xstream Fiber
Netplus
i have TP-Link archer ax10 which i got recently and the thing is my isp not allowing mac change from backend or even ignoring my request,so my tp link has mac clone and when am trying to clone ont mac,my zte f660 ont is just blocking it btw it is on bridge mode,i even tried my pc connecting to ont with changed mac but still even my pc not able to connect,it is connecting with default mac but not with mac clone
my isp uses mac authentication and dynamic ip not pppoe.my ip just gets renew and so i cant even use that wan ip in static.
does anyone have any clue why it is happening i even tried disabling dhcp,firewall.

when my ont mac is cloned by my router,it cant ping or forward traffic through connection but it does get ip from olt 100.74.xxx.xxx

Router-TP LINK AX10
ONT- ZTE F660 v7.1
 
You don't need to Clone your mac address
, Then you must create wan DHCP (automatically). Everything is good...
 
i think it has to do with ont mac,as when i use bridge,my ont's mac table shows lan 1 with TP-Link mac and if that mac is same as router's mac then it interferes and blocks it,so i think this can be tackled by changing ont's mac via telnet and then using tp link via mac clone
 
i have tried everything but nothing worked :p
i unlocked router firmware yesterday,it was locked before,so am going to try that bridge mode thing once more and see if it works and if it doesnt then will change mac address of ont through telnet and then try it,
sadly my isp doesnt use pppoe authentication if they were using that then this would have been just plug and play but that mac authentication is real problem,
i used router with airtel ont who uses pppoe and it was fine with them
 
Back