MTNL Broadband: D-Link GLB 802C IP Filtering

[flame]

need IP filtering settings for D-Link GLB 802C in Security Level LOW sometimes unable to open sites and Modem Interface.

 

[zeo]

If you are unable to open Modem's setting page just check whether you have assigned a manual LAN/USB IP address.

 

[flame]

no problem in accessing modem page(using Ethernet) in security level NONE,LOW MEDIUM or HIGH when i check security level low,medium or high modem page opens but take longer time then Security level NONE. And one more thing in Security level low unable to access websites even google pinging works on all websites just sites not opening

 

[zeo]

I'm also using the same modem as yours GLB-802C and the security level of my modem is set to Medium (default, never changed it).Why do you need to change the security level?

 

[flame]

but in LOW, MEDIUM and HIGH security level unable to open any websites

 

[socrates]

If some websites are not opening then check your modem MTU settings. This has been discussed elsewhere on this forum. :smile:

https://broadband.forum/mtnl-broadband/18685-mtnl-triband-broadband-cannot-open/

 

---

[flame]

no site is opening. After setting LOW, MEDIUM and HIGH security level unable to open any sites just ping workss

 

[socrates]

Pls post what MTU is used in your modem. Also please read the posts in the link above.

 

[flame]

there is no option to check MTU in D-Link GLB 802C

 

[socrates]

there is no option to check MTU in D-Link GLB 802C

I have a DSL 502T & its not too different from your model see this image, It should be there. In my case its in Home->WAN
http://img695.imageshack.us/i/40028661.jpg/