Nat routing in MT 841

[nataprob]

Hi everyone,

I recently got a static IP for my business 3000 plan, and I plan use this to host a site, I have a MT841 modem.

I have followed the instructions for port forwarding as given in the link portforward.com/englis...1index.htm

Nat has been enabled in the modem, and I have made the nat entries for the modem to allow the proper tcp traffic to the private server behind the modem.

When I scan for open ports on the static ip I get the following results.

PORT STATE SERVICE
21/tcp closed ftp
22/tcp closed ssh
23/tcp open telnet
24/tcp closed priv-mail
25/tcp closed smtp
80/tcp open http
139/tcp closed netbios-ssn
8080/tcp closed http-proxy

but when I look at the filters screen it shows that the traffic is allowed for the port onto the private server. But when I try to use the port with the static IP the router does not forward it to the private server.

the following link has the screenshots of the router config
router config

Please help me I have been trying for sometime and have not been able to make this work.

Your help will be much appreciated.

 

[essbebe]

post ipconfig/all
seems conflict in IP address
OR
in the modem is there an access control page ? all are selected ?
beetel page.

 

[nataprob]

Hi,I am not using any filtering or any access control lists, the following is the ipconfig /all result.Windows IP Configuration Host Name . . . . . . . . . . . . : LAPTOP Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Mixed IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : NoEthernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Broadcom 440x 10/100 Integrated Controller Physical Address. . . . . . . . . : 00-15-C5-57-14-F1Ethernet adapter Local Area Connection 2: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth PAN Network Adapter Physical Address. . . . . . . . . : 10-11-11-11-11-11Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Dell Wireless 1390 WLAN Mini-Card Physical Address. . . . . . . . . : 00-18-F3-79-54-6E Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.1.50 Subnet Mask . . . . . . . . . . . : 255.255.248.0 Default Gateway . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 218.248.240.208 218.248.240.135

 

[essbebe]

I am not very familiar with this set up.
Anyway enter the Static IP address allotted by BSNL and try.
( In TCP/IP properties)

Ref :How do I configure my static IP address? - Ask Leo!