need help about utstarcom 300R2U

[trillian]

hi, i am using dataone home 500 plan. since my operating system Vista ultimate.i faced problem in port forwarding in utorrent. so i saw an thread saying that to change my router to bridge mode. i changed and utorrent works well but my problem is if use utorrent i cannot able to browse any webpage. after that once again i need to dissconnect my router and reconnect . after that its working .. so i need a help to solve this problem...

 

[essbebe]

members/trillian/Welcome to Broadbandforum.inConfirm the modem you use is UT300R2U. Screen shot of device status will be helpful.If possible , try "always on" PPP/PPPoE connection in WAN page.Enter user ID without @ bsnl.in and password. Check internet connection. Open modem page 192.168.1.1/main.html to access Advanced options.Under NAT Virtual servers etc .Go to portforward.com for detailed instructions. Please give feedback .Para two : You may have to disable sometimes IPV6 in TCP/IP properties. I have Xp pro sp2 only.

 

[neevarp]

U are not able to browse properly while using utorrent because utorrent is using all the available bandwidth. Torrent clients are programmed so as to use the available bandwidth, unless configured otherwise. Alter your download speed to 200KBps or something lower and hopefully u should be able to browse faster...

 

[trillian]

i cannot find NAT virtual server setting in my router setting..

screenshot 1:

http://uploads.screenshot-program.com/my.php?image=upl3138373322.jpg



screenshot2:

http://uploads.screenshot-program.com/my.php?image=upl0605110737.jpg

 

[essbebe]

Port Forwarding - India Broadband Wiki
In IE try 192.168.1.1/home.html or 192.168.1.1/main.html
Unable to make out anything from your screen shots. Thumbnail pictures.
use tinypic.com

 

[neevarp]

Do u find an entry named DMZ on your router ?

 

[trillian]

just click the screenshot picture. it will be larger..

 

[essbebe]

just click the screenshot picture. it will be larger..
using FF.
will see after 9Pm with IE ( Airtel free NU !)

update : logged out. @ saw the pics enlarged in FF. .

 

[trillian]

yes i found the following under NAT

NAT -- DMZ Host

The DSL router will forward IP packets from the WAN that do not belong to any of the applications configured in the Virtual Servers table to the DMZ host computer.

Enter the computer's IP address and click "Apply" to activate the DMZ host.

Clear the IP address field and click "Apply" to deactivate the DMZ host.

DMZ Host IP Address:

 

[neevarp]

Enter 192.168.1.1 on the IP address tab of DMZ.