Need Help in establishing a P2P wireless Link

  • Thread starter Thread starter Nithishsaba
  • Start date Start date
  • Replies Replies 32
  • Views Views 3,581
N

Nithishsaba

Messages
211
Location
Coimbatore
ISP
Airtel, Vi India, Railwire
Hello everyone,
i need a help in establishing a 2KM point to point link, i plan to share my internet connection with my friend since he don't have access to fiber, i need suggestions on what type of CPE to use and configs. I have shortlisted TP-Link cpe610, cpe 510 and cpe 210, i live in a rural area surrounded by coconut trees, do i need to point the CPE above the coconut trees? any help would be appreciated!
 
These can give you some ideas


Source
I would suggest Ubiquiti for 2 kilometers. Tp- Link will give low speeds

Also use Cat-6 outdoor rated thick shielded cable for all the outdoor cabling you are going to do . Atleast till the point where you bring it inside into your premises. Do it at both sides

Overall it is a costly project(may cost somewhere around 12k) to execute for getting a 50 Mbps link over that distance
 
Last edited:
But it will be a waste of money if you get 1 or 2 Mbps . It would be great if your friend can get an ISP . What are the speeds you are trying to achieve here
The TP-Link 210 on the website shows 5km+ on the model . Here in real deployments(as shown in video) , the speed they are getting is 2 Mbps on a 1km range.
 
shashankb said:
But it will be a waste of money if you get 1 or 2 Mbps . It would be great if your friend can get an ISP . What are the speeds you are trying to achieve here
The TP-Link 210 on the website shows 5km+ on the model . Here in real deployments(as shown in video) , the speed they are getting is 2 Mbps on a 1km range.
Click to expand...
The thing is there is no cable operator is willing to give connection in his area!
this is the only option available
 
You must log in or register to reply here.
Back