Plan upgraded from 949 to 999 but speed remains the same

  • Thread starter Thread starter sujeet2555
  • Start date Start date
  • Replies Replies 44
  • Views Views 5,932
I called to SDO and he confirmed that there is 150Mbps in 999 speed and it is being resolved from their end .they have requested to give them some time. So i will wait a few days and see.

My network adaptor shows : Network adaptor : Link Speed 1000/1000 (Mbps)
Manufacturer : Microsoft
Description :Intel(R) Ethernet Connection (2) I219-V

Here is my plan details

Pasteboard - Uploaded Image

Simple and lightning fast image sharing. Upload clipboard images with Copy & Paste and image files with Drag & Drop
pasteboard.co
MRU is currently 1492.i will test it on 1460 and post the result .
 
Last edited:
With MRU 1460 speed is just the same

SourceIf i connect my PC to router link speed shows as 1000 Mbps but when i connect my PC to ONU it show as 100 Mbps . Does that mean wires is not supporting or ONU is not supporting over 100Mbps speed ?

And i have no clue about iperf3 test .
 
So you are saying that till now you are using your setup like ONU(router mode)->router-> PC
obviously, your PC will show 1000Mbps link speed in this setup as you are connected to the GbE port of your router and the bottleneck is the link from ONU to the router which is limiting bandwidth to 100Mbps.
If there are two ports on the ONU then most likely port 2 is the GbE port. Connect your PC to port 2 and check the link speed.
 
i was using in bridged mode till now but for just checking i used route mode to exclude the router as BSNL was telling me that your router is bad ,replace it.
Ohh i see it now ,looks like ONU does not support the speeds. Why the hell they sell me this shit ?

Ethernet Port Status
PortStatusReceive (RX)Transmit (TX)
ModeSpeedLinkBytesPacketsBytesPackets
1Half-duplex10 Mbit/sDown826043463114772218388050121530583
2Full-duplex100 Mbit/sUp207474341211617259884695232982

BTW i have a TP-Link Gigabit GPON router but it did not got connected since the vendor said the network is EPON .Can i make it work or do i have change the ONU ?

​

 
Last edited:
Nah! your TP-Link is most probably GPON only it will not support EPON.
Better buy XPON ONT which supports both E-GPON. You can get it for 2k from the local market. The online prices little high.
But before buying any ONT confirm with the vendor that the brand will work with their OLT, sometimes ONT has compatibility issues with OLT.
 
i have arranged a DBC onu which is a xpon with Gbe. i am getting 1000 Mbps link speed with onu but still speed is not going above 100 Mbps.

Pasteboard - Uploaded Image

Simple and lightning fast image sharing. Upload clipboard images with Copy & Paste and image files with Drag & Drop
pasteboard.co

Pasteboard - Uploaded Image

Simple and lightning fast image sharing. Upload clipboard images with Copy & Paste and image files with Drag & Drop
pasteboard.co
 
You must log in or register to reply here.
Back