Hi,
I would like to know how to port forward a beetel 440BXI connected to D-Link DIR-615. The system I would like to portforward all web/tomcat/ssh requests is on IP 192.168.0.36.
This is how the configuration looks:
Internet -> Beetel 440 BXI -> DLINK DIR-615 -> ubuntu server (192.168.0.36)
More information:
1. I have a static IP address.
2. Beetel router details:
a. IP address 192.168.1.1
b. DHCP is enabled in the range 192.168.1.2 to 192.168.1.254
c. The Static IP I acquired from Airtel has been configured in the Beetel modem
d. Wireless is tunred off.
3. Dlink router details:
a. IP Address 192.168.1.2 - this is displayed under the Beetel router config page but on the IP Address of The router on the DLINK's configuration page it is displayed as 192.168.0.1. Either way I can access the config page of Dlink using 192.168.0.1
b. DHCP is enabled on the DLINK as well in the range 192.168.0.2 to 192.168.0.254
I have tried the below nothing seems to work:
1. Configured virtual server settings under the DLINK router. Didnt work.
2. Configured port forwarding on the DLINK router. Didnt work.
3. Configured NAT on the Beetel router and forwarded 80,8080,22 to 192.168.0.36. Didnt work.
4. Configured NAT on the Beetel router and forwarded 80,8080,22 to 192.168.0.1 (router's address). Didnt work.
Could someone please tell me how to configure this please?
---------- Post added at 09:23 PM ---------- Previous post was at 09:11 PM ----------
I figured out the problem. You need to do the below :
1. On the beetel router, you need to set up NAT to forward ports to the IP address 192.168.1.2. I think you can find this address under the ARP link of your beetel router.
2. On the DLINK router you need to set up port forwarding for all the ports you need to the correct IP address in my case 192.168.0.36
I would like to know how to port forward a beetel 440BXI connected to D-Link DIR-615. The system I would like to portforward all web/tomcat/ssh requests is on IP 192.168.0.36.
This is how the configuration looks:
Internet -> Beetel 440 BXI -> DLINK DIR-615 -> ubuntu server (192.168.0.36)
More information:
1. I have a static IP address.
2. Beetel router details:
a. IP address 192.168.1.1
b. DHCP is enabled in the range 192.168.1.2 to 192.168.1.254
c. The Static IP I acquired from Airtel has been configured in the Beetel modem
d. Wireless is tunred off.
3. Dlink router details:
a. IP Address 192.168.1.2 - this is displayed under the Beetel router config page but on the IP Address of The router on the DLINK's configuration page it is displayed as 192.168.0.1. Either way I can access the config page of Dlink using 192.168.0.1
b. DHCP is enabled on the DLINK as well in the range 192.168.0.2 to 192.168.0.254
I have tried the below nothing seems to work:
1. Configured virtual server settings under the DLINK router. Didnt work.
2. Configured port forwarding on the DLINK router. Didnt work.
3. Configured NAT on the Beetel router and forwarded 80,8080,22 to 192.168.0.36. Didnt work.
4. Configured NAT on the Beetel router and forwarded 80,8080,22 to 192.168.0.1 (router's address). Didnt work.
Could someone please tell me how to configure this please?
---------- Post added at 09:23 PM ---------- Previous post was at 09:11 PM ----------
I figured out the problem. You need to do the below :
1. On the beetel router, you need to set up NAT to forward ports to the IP address 192.168.1.2. I think you can find this address under the ARP link of your beetel router.
2. On the DLINK router you need to set up port forwarding for all the ports you need to the correct IP address in my case 192.168.0.36