problem with bridged mode (UT300R2U)

[makubex]

I have problems with setting up bridged mode with my ut300rtu modem.When I edit the pppoe_0_35_1 connection to bridge, the link seems fine, but when I dial I always get errors like 691... or it just stays stuck at "Connecting to WAN miniport" or "Verifying username and password".anybody got any comments?

 

[essbebe]

http://i9.tinypic.com/81gwtw7.jpg
Is this your modem Page ? Select "Bridged"

 

[makubex]

no, that's not my modem page... my modem is the one provided by BSNL with the stripped down f/w. How do I configure that?also is there a way I can change the f/w of the modem?

 

[essbebe]

Post screen shot of your modem's menu page
Or Device status page example :http://i22.tinypic.com/152byh3.jpg

 

[makubex]

the device status page:
http://img144.imageshack.us/my.php?image=dsey3.jpg

 

[essbebe]

also is there a way I can change the f/w of the modem
What is the reason.? F/W update with equivalent version will be at your Own risk.
same like Beetel 220BX.
Open 192.168.1.1/main.html.
Under Advanced select virtual server etc.
http://i4.tinypic.com/5y2f8ds.jpg
go to www. portforward.com and select either ut300r2u or beetel 220Bx for port forwarding instructions.

 

[makubex]

I do not have Virtual Server option under NAT, my modem has a stripped down firmware.and what can I do about the problem with my bridging?

 

[essbebe]

I do not have Virtual Server option under NAT
Not even Port triggering ?
Open WAN page and select "Bridged" option .
In computer TRY existing WAN miniport connection.
or make a fresh connection and try.

Para two A) Connect in "always on Mode "
start run type cmd type IPconfig/all . Note the details.
(B) Changed to dialup mode.
repeat. Does the entries tally ?

 

[makubex]

yes the entries tally, I dont change my LAN settings

 

[essbebe]

Now what is the problem ?