Railwire LCO and his control over my ONU Router, Is it Mandatory?

  • Thread starter Thread starter Rahul.H
  • Start date Start date
  • Replies Replies 14
  • Views Views 6,370
Rahul.H

Rahul.H

Messages
7
Location
Jalgaon
ISP
Railwire
I just got Railwire Fiber Optic Service and as always I login to LCO provided ONU wifi router and then I deleted the route mode created by my LCO and setup the Bridge mode and connected it to my Dual Band Netgear Router, Everything was working as expected but when I reboot the LCO provided ONU wifi router it's revert back to the route mode which is my LCO created setup in beginning so I called him and he said it's auto managed from his side so he can remotely help me if any config problem arrive there in router and if I still want then he can set up the bridge mode. Is your LCO's working the same way as mine?
 
Sort by date Sort by votes
If he's ready to enable bridge mode for you from his end, ask him to do that. I would think that the last mile config would vary from LCO to LCO and there wouldn't be a standard as such.
 
Upvote 0
Thanks for your response, Yes I have that option to ask him to do it but I am curious to know and a security purpose why I don't have the control to do that my self and even more I did a hard reset on his provided router so I can set it up my self from scratch but still all the setting he did comes back. Also there are some settings which I did like change from NAT Type 4 to NAT Type 2 for gaming purpose applied successfully and didn't revert back after reboot which is good but when I enable UPNP and replace Railwire default DNS to Google DNS or Open DNS always revert back. Anyone have any idea how he can still manage the setting in router even after the hard reset?
 
Upvote 0
@Rahul.H The OLT is configuring your ONT remotely. Everytime it is turned on, desired settings are synced by the OLT at LCO's premises. Some LCOs do this, some don't. It enables LCOs to troubleshoot remotely so they don't have to visit your place
 
Upvote 0
@PawanKumar Thanks for the perfect explanation. Do you know any way to stop this OLT to configure my ONT remotely so I can do the setting the way i want because I just don't want to request them every time to enable or disable features in my own router where it's really hard to get them on call sometime and I work mostly at night time when they are 100% unavailable to fulfill my request.
 
Upvote 0
JioFiber users :

first time.webp
 
Upvote 0
@Rahul.H I don’t think there’s a way, if there is, I’m not too sure. I have BSNL and my LCO doesn’t have this remote configuration thing, so I don’t have any experience with it. You should talk to your LCO and tell him the settings you want to change, so he can do something at the backend where this configuration happens.

Just to confirm, unplug the fiber cable and restart your ONT, see if the settings come back. This way you can make sure if the configuration is pushed by OLT (which I think is the case) or it is happening in ONT. You can determine next steps based on this.
 
Upvote 0
I had the same issue with my Railwire connection. I talked to my LCO and told him that I want to use it in bridge mode and disable wifi. He made the changes to my profile on his end and now it always remains on bridge mode.
 
Upvote 0
You must log in or register to reply here.
Back