[Release] In-Kernel GPON MAC & OMCI Stack working on OpenWrt 23.05 (Kernel 6.18) for Sercomm JioFiber JCOW414

Messages
2
Location
Indore
ISP
jio, airtel
Hey everyone,

If you have a Sercomm JioFiber Home Gateway (JCOW414) lying around, you probably know that while community OpenWrt builds previously existed, the optical GPON fiber WAN never worked. People were forced to use it strictly as a dumb secondary Wi-Fi AP while keeping the locked stock Jio router as their main gateway.

After deep reverse engineering and kernel driver adaptation, the GPON optical fiber WAN driver is now fully functional on upstream OpenWrt 23.05 (Linux kernel 6.18)!

You can now use the JCOW414 as your primary, standalone fiber gateway with full gigabit routing, bufferbloat mitigation (SQM/CAKE), WireGuard, ad-blocking, and custom DNS.

---

### What Works

* Native GPON MAC & In-Kernel OMCI Stack:
* Reaches optical link state O5 (Operation) with Radisys (RSYS) OLTs.
* Multi-packet OMCI MIB upload (346/346 entities negotiated cleanly).
* Real-time downstream AES hardware decryption.
* Dynamic upstream Alloc-ID & GEM port scheduling directly from OLT grants.
* Direct carrier connection on VLAN 1015 (pon0.1015) with native IPv4 & IPv6 DHCP.
  • 4-Port Gigabit DSA Switch: Internal MediaTek MT7530 switch with independent lan1–lan4 ports bridged into br-lan.
  • Dual-Band Concurrent Wi-Fi: 2.4 GHz MT7603E (802.11b/g/n) + 5 GHz MT7615E/MT7663 (802.11a/n/ac VHT80) with 802.11k/v fast roaming (usteer).
  • Hardware Acceleration & USB: USB 3.0 + USB 2.0 host ports with full exFAT/NTFS/ext4 support.
  • Pre-bundled Packages: Includes WireGuard, SQM (CAKE), ksmbd (SMB3 NAS), miniupnpd, and LuCI web UI.

---

### No Soldering or Opening the Router Case!

You do not need to open the router casing or solder UART serial pins. You can flash OpenWrt directly over LAN using JFxploit:

1. Connect your PC to router port LAN1 via Ethernet (default stock IP: 192.168.29.1).
2. Run JFxploit to gain root access and open telnet:
Code:
bash
   git clone https://github.com/JFC-Group/JFxploit.git
   cd JFxploit && uv sync
   uv run jfxploit run 192.168.29.1
3. Host the compiled openwrt-jcow414-squashfs-tclinux.trx on your PC (python3 -m http.server 8000).
4. Telnet into the router (telnet 192.168.29.1) and flash to Bank 1 ONLY:
Code:
sh
   cd /tmp
   wget http://<PC_IP>:8000/openwrt-jcow414-squashfs-tclinux.trx -O /tmp/fw.trx
   mtd -f write /tmp/fw.trx tclinux
   /usr/bin/sys bootflag swap
   reboot
5. Router boots into OpenWrt on http://192.168.1.1!

---

### Unbrickable Dual-Bank Safety Fallback

The JCOW414 flash layout features hardware dual-bank redundancy:
  • By flashing only to Bank 1 (tclinux), the factory stock Jio OS on Bank 2 (tclinux_slave) remains 100% untouched.
  • If you ever want to revert completely to stock Jio OS, simply run fw_setenv bootflag 1 && reboot from OpenWrt, and your router instantly boots back into factory stock firmware!

---

### 1-Click Identity Configurator (jiofiber-config)

Jio authenticates routers using GPON Serial Number, WAN MAC, and DHCP Option 60/61. The firmware includes an automated CLI tool:

* Using this router's own registered subscription:
Code:
sh
  jiofiber-config native
* Cloning credentials from another registered Jio router:
Code:
sh
  jiofiber-config clone <GPON_SN> <WAN_MAC> [PLOAM_PASS]
(Automatically programs the xPON OMCI agent, WAN MAC override, Option 60, Option 61, suppresses Option 12 hostname, and reloads networking in one command).

---

### Links & Source Code


---

### Credits & Acknowledgments

Huge thanks to the community members whose reverse-engineering work made this possible:
  • Anand (@Asjohn720) for the foundational JCOW414 Device Tree (en7528-sercomm-jcow414.dts) and early OpenWrt bring-up.
  • @zke-7D6 for initial hardware teardown, PCB analysis, and bootloader research.
  • @gpsarathy for firmware decryption research.
  • JFC-Group for the JFxploit remote rooting toolkit.
  • Lorenzo Bianconi, Felix Fietkau, and Christian Marangi for upstream Linux Airoha Ethernet/QDMA architecture.
  • Matheus Sampaio Queiroga (@Sirherobrine23) and Cristian Papa for the EN7523/EN7528 xPON/OMCI driver base.
  • @pranavkhare11 for hardware UART serial intercept and OMCI state machine debugging.
  • The OpenWrt Project team.
 
Great stuff 👏, is there a possibility in future to bring in support for JCO4032 ? Seems like it shares hardware with JCOW411.
 
f0r3he4d, I dont have the hardware and as I know it has Broadcom BCM6878 soc.
and I also didn't find any wrt build for it so cant say much.
 
Last edited by a moderator:
Anything for JCow404. I am growing impatient with the need to spend extra for hardware to use a service correctly or without any caveats.
 
Back