-
Amazon Deals - ToS - Like us?
router - port forwarding connet hfcl
- Thread starter newmoon19
- Start date
- Replies 19
- Views 29,535
pardeep jha
Newbie
sat sri akal,
paaji when i got connection, i had same problem..
but now its lil bit solved
1st of alll, lemme solve ur misunderstanding
you have 300-700Kbps line ( small 'b' in kbps ) it means Kilo bits per second
while u get speed 60-70 kBps ( capital 'B' in kBps) means Kilo Bytes per second
To get speed in kilobytes per second , divide the speed in kilobits per second by 8
In your case , if u get speed 700kbps, ur downlaod speed will be 700/8=87kBps
so the speed u getting is OK for such a small ISP
for Torrents
u'll have to port forward
Ihope u have same modem as mine
Port Forward
1) Open your browser . Type 192.168.1.1 in address bar
2) It will ask for username password , most ppl have default ones, Try these username & passwords
USERNAME = Admin
PASSWORD = admin or pass or password
3) Router Window will open. Click on Advanced Setup on Left side
4) Then click on NAT, then Virtual Servers.
5) Click on Add button middle of window.
6) Now type things as shown in picture...
http://img519.imageshack.us/my.php?image=tuteg8.jpg
Notice that red colored thing, the IP i typed there is my computes LAN IP,
To get your LAN IP, do this
Start>RUN> Type 'CMD'
Cmd will open, type there 'ipconfig'
Notice the default gateway, type this Ip to virtual server table described in step 6
7) Then Click on Apply.. & restart ur modem
Configuring utorrent
1) Open utorrent. Click on Option > SPeed Guide
2) In CUrrent Port box ,type the port we just forwarded ie. 40978 & click Use Selected Settings
Congrats, we're done
Make sure that 'Randomize port each start' is unchecked in Option>Preferences > Connection menu
If u have any problem post it here
hello dear... i tried the setting u have shown but its not working on my connection i m not getting the image as u have shown.
there is only WAN and LAN no "NAT"
plz help me out ... how to open port..
i have called the 1920 no. for assistance but they say their company do not facilitate port forwarding.. ny solutions.. ??
paaji when i got connection, i had same problem..
but now its lil bit solved
1st of alll, lemme solve ur misunderstanding
you have 300-700Kbps line ( small 'b' in kbps ) it means Kilo bits per second
while u get speed 60-70 kBps ( capital 'B' in kBps) means Kilo Bytes per second
To get speed in kilobytes per second , divide the speed in kilobits per second by 8
In your case , if u get speed 700kbps, ur downlaod speed will be 700/8=87kBps
so the speed u getting is OK for such a small ISP
for Torrents
u'll have to port forward
Ihope u have same modem as mine
Port Forward
1) Open your browser . Type 192.168.1.1 in address bar
2) It will ask for username password , most ppl have default ones, Try these username & passwords
USERNAME = Admin
PASSWORD = admin or pass or password
3) Router Window will open. Click on Advanced Setup on Left side
4) Then click on NAT, then Virtual Servers.
5) Click on Add button middle of window.
6) Now type things as shown in picture...
http://img519.imageshack.us/my.php?image=tuteg8.jpg
Notice that red colored thing, the IP i typed there is my computes LAN IP,
To get your LAN IP, do this
Start>RUN> Type 'CMD'
Cmd will open, type there 'ipconfig'
Notice the default gateway, type this Ip to virtual server table described in step 6
7) Then Click on Apply.. & restart ur modem
Configuring utorrent
1) Open utorrent. Click on Option > SPeed Guide
2) In CUrrent Port box ,type the port we just forwarded ie. 40978 & click Use Selected Settings
Congrats, we're done
Make sure that 'Randomize port each start' is unchecked in Option>Preferences > Connection menu
If u have any problem post it here
hello dear... i tried the setting u have shown but its not working on my connection i m not getting the image as u have shown.
there is only WAN and LAN no "NAT"
plz help me out ... how to open port..
i have called the 1920 no. for assistance but they say their company do not facilitate port forwarding.. ny solutions.. ??
This usually happens with some crappy modems :huh:
try http://192.168.1.1/main.html instead of just 192.168.1.1
There should be NAT option now
Follow my steps to port forward
try http://192.168.1.1/main.html instead of just 192.168.1.1
There should be NAT option now
Follow my steps to port forward
rishu.asthana
Newbie
hey bro i'm also using cable net withspeed of 256
and want port forwarding but my provider has given dhcp connection and i don't have the router password also as he has changed it. is there any way to reset the router without losing the configuration. as after resetting it i'll not be able to do the settings again. my router is TP-Link wireless router wr543g
and want port forwarding but my provider has given dhcp connection and i don't have the router password also as he has changed it. is there any way to reset the router without losing the configuration. as after resetting it i'll not be able to do the settings again. my router is TP-Link wireless router wr543g
sat sri akal,
paaji when i got connection, i had same problem..
but now its lil bit solved
1st of alll, lemme solve ur misunderstanding
you have 300-700Kbps line ( small 'b' in kbps ) it means Kilo bits per second
while u get speed 60-70 kBps ( capital 'B' in kBps) means Kilo Bytes per second
To get speed in kilobytes per second , divide the speed in kilobits per second by 8
In your case , if u get speed 700kbps, ur downlaod speed will be 700/8=87kBps
so the speed u getting is OK for such a small ISP
for Torrents
u'll have to port forward
Ihope u have same modem as mine
Port Forward
1) Open your browser . Type 192.168.1.1 in address bar
2) It will ask for username password , most ppl have default ones, Try these username & passwords
USERNAME = Admin
PASSWORD = admin or pass or password
3) Router Window will open. Click on Advanced Setup on Left side
4) Then click on NAT, then Virtual Servers.
5) Click on Add button middle of window.
6) Now type things as shown in picture...
http://img519.imageshack.us/my.php?image=tuteg8.jpg
Notice that red colored thing, the IP i typed there is my computes LAN IP,
To get your LAN IP, do this
Start>RUN> Type 'CMD'
Cmd will open, type there 'ipconfig'
Notice the default gateway, type this Ip to virtual server table described in step 6
7) Then Click on Apply.. & restart ur modem
Configuring utorrent
1) Open utorrent. Click on Option > SPeed Guide
2) In CUrrent Port box ,type the port we just forwarded ie. 40978 & click Use Selected Settings
Congrats, we're done
Make sure that 'Randomize port each start' is unchecked in Option>Preferences > Connection menu
If u have any problem post it here
hey dude,i cannot get thru to that page,from 192.168.1.1,the passwords dont match,the username that has been provided to me doesnt alow me to get thru,n the ones provided by u also donot match...so any help pls...i amm using 666 plan and most of time my speed remains between 15-30 and sometimes even below 5
----------
hey dude,i cannot get thru to that page,from 192.168.1.1,the passwords dont match,the username that has been provided to me doesnt alow me to get thru,n the ones provided by u also donot match...so any help pls...i amm using 666 plan and most of time my speed remains between 15-30 and sometimes even below 5
----------
hey man, i have windows vista,and there it gives me 2 options internal port start,external port start,int port end and ext port end,unlike urs which just has int and external port,,,any help here??????
paaji when i got connection, i had same problem..
but now its lil bit solved
1st of alll, lemme solve ur misunderstanding
you have 300-700Kbps line ( small 'b' in kbps ) it means Kilo bits per second
while u get speed 60-70 kBps ( capital 'B' in kBps) means Kilo Bytes per second
To get speed in kilobytes per second , divide the speed in kilobits per second by 8
In your case , if u get speed 700kbps, ur downlaod speed will be 700/8=87kBps
so the speed u getting is OK for such a small ISP
for Torrents
u'll have to port forward
Ihope u have same modem as mine
Port Forward
1) Open your browser . Type 192.168.1.1 in address bar
2) It will ask for username password , most ppl have default ones, Try these username & passwords
USERNAME = Admin
PASSWORD = admin or pass or password
3) Router Window will open. Click on Advanced Setup on Left side
4) Then click on NAT, then Virtual Servers.
5) Click on Add button middle of window.
6) Now type things as shown in picture...
http://img519.imageshack.us/my.php?image=tuteg8.jpg
Notice that red colored thing, the IP i typed there is my computes LAN IP,
To get your LAN IP, do this
Start>RUN> Type 'CMD'
Cmd will open, type there 'ipconfig'
Notice the default gateway, type this Ip to virtual server table described in step 6
7) Then Click on Apply.. & restart ur modem
Configuring utorrent
1) Open utorrent. Click on Option > SPeed Guide
2) In CUrrent Port box ,type the port we just forwarded ie. 40978 & click Use Selected Settings
Congrats, we're done
Make sure that 'Randomize port each start' is unchecked in Option>Preferences > Connection menu
If u have any problem post it here
hey dude,i cannot get thru to that page,from 192.168.1.1,the passwords dont match,the username that has been provided to me doesnt alow me to get thru,n the ones provided by u also donot match...so any help pls...i amm using 666 plan and most of time my speed remains between 15-30 and sometimes even below 5
----------
hey dude,i cannot get thru to that page,from 192.168.1.1,the passwords dont match,the username that has been provided to me doesnt alow me to get thru,n the ones provided by u also donot match...so any help pls...i amm using 666 plan and most of time my speed remains between 15-30 and sometimes even below 5
----------
hey man, i have windows vista,and there it gives me 2 options internal port start,external port start,int port end and ext port end,unlike urs which just has int and external port,,,any help here??????
saare mere veero tusi kyo port ffd de chakkar vich fass rahe ho.sirf ek simple step nal tuhadi port ffd ho javegi. o enj hai,browser vich 192.168.1.1 bharo te pass id bharo.jo 'admin' te 'password' hai, fer NAT te click karo fer DMZ HOST te click karo. DMZ Host IP Address: vich apna ip address bhar do.fer save/apply kar do.tuhadiyaan saariyaan ports khul jaan giyaan.dhanwaad.tuhada pyaara,rubak.jalandhar.
Re: HFCL CONNECT port forward.
saare mere veero tusi kyo port ffd de chakkar vich fass rahe ho.sirf ek simple step nal tuhadi port ffd ho javegi. o enj hai,
browser vich 192.168.1.1 bharo te pass id bharo.jo 'admin' te 'password' hai, fer NAT te click karo fer DMZ HOST te click karo. DMZ Host IP Address: vich apna ip address bhar do.fer save/apply kar do.
tuhadiyaan saariyaan ports khul jaan giyaan.
dhanwaad.
tuhada pyaara,
rubak.
jalandhar.
saare mere veero tusi kyo port ffd de chakkar vich fass rahe ho.sirf ek simple step nal tuhadi port ffd ho javegi. o enj hai,
browser vich 192.168.1.1 bharo te pass id bharo.jo 'admin' te 'password' hai, fer NAT te click karo fer DMZ HOST te click karo. DMZ Host IP Address: vich apna ip address bhar do.fer save/apply kar do.
tuhadiyaan saariyaan ports khul jaan giyaan.
dhanwaad.
tuhada pyaara,
rubak.
jalandhar.
saare mere veero tusi kyo port ffd de chakkar vich fass rahe ho.sirf ek simple step nal tuhadi port ffd ho javegi. o enj hai, browser vich 192.168.1.1 bharo te pass id bharo.jo 'admin' te 'password' hai, fer NAT te click karo fer DMZ HOST te click karo. DMZ Host IP Address: vich apna ip address bhar do.fer save/apply kar do. tuhadiyaan saariyaan ports khul jaan giyaan. dhanwaad. tuhada pyaara, rubak.jalandhar.