Set router for Static IP on mtnl broadband

[eludic]

Hi,I want to set my router on Bridge mode using the static IP I got from MTNL. The guys at MTNL are anything but helpful. I cant seem to configure the router in bridge mode as I do not have all the necessary information. I am looking for the default gateway and subnet mask which I need to set in the router. If someone can provide the info, I would be more than happy. My IP is something like 120.XX.XX.5.I have tried using subnet mask as 255.255.255.255 while gateway as 59.183.191.254 however the router does not seem to accept the 59.* gateway.I am using Linksys WAG200G. I am not trying to configure Port Forwarding or Port Triggering. I want to set the router in RFC 1483 Bridged mode or Routed mode where it is asking for:IP Address: 120.XX.XX.5Subnet Mask: 255.255.255.255Default Gateway: [This is what I want]Primary DNS: The one provided by MTNLSecondary DNS: The one provided by MTNLAny help received would be appreciated. Thank You.

 

[intrigue]

To get default gateway:1) Run "cmd"2) Type in "ipconfig"And you will get the info. :thumbsup::thumbsup:

 

[eludic]

That does not give me the gateway. I have tried ipconfig /all as well

 

[intrigue]

Do you have the manual of modem? Default gateway must be in it.Sorry I don't know much. I am noob.

 

[eludic]

I know the gateway to the modem its 192.168.1.1. However I need MTNL Gateway

 

[superprash2003]

ideally it should.. if pppoe mode it would show your LAN gateway , if in bridged mode it should show your WAN gateway

 

[eludic]

Somehow it does not work and the guys at MTL are anything but helpful!

 

[Superunknown]

first of all that subnet mask is invalid. secondly you should put the IP of your router as the default gateway on your PC under network settings.

 

[popcorn]

i think it is 59.182.191.254