UTSTARCOM WA3002G4 Firmware

[aliensole]

Hi, even I have uploaded the firmware. now I dont get the DSL and internet light.. Can connect to the internet. Please guide gurus.... Is there any way I can downgrade the firmware or load the original firmware to router?

 

[essbebe]

@aliensole

1.
even I have uploaded the firmware.
Screenshot of Device Info needed.
http://img209.imageshack.us/img209/5306/deviceinfohd4.png
2.
Can connect to the internet.
vague info.
confirm you can surf the web.
Mode lan or wifi >
3.
any way I can downgrade the firmware .......
can you access modem menu pages ?
4.
Welcome to Motive_BSNL
Not recommended : many have reported difficulties.


Feedback.

 

[jebas15]

I want firmware of this configuration. Please help

 

[essbebe]

I want firmware of this configuration. Please help



this is the latest.
Any way after 192.168.1.1
reenter 192.168.1.1/look.html

Èí¼þ°æ±¾ V8.24.01.01
Èí¼þ±àºÅ T2Q-0Q-007

 

[benn371]

Hello, I have UTSTARCOM WA3002G4. It takes long time to boot up, when i turn on the modem every light in it starts blinking and stay on for more than 2 or 3 hours
after that the lights goes off and when DSL Light starts blinking it will again restarts such it will restart for more than 4 times after that only internet will connect.
I've tried Resetting the modem still not working. I'm thinking is it possible if i can upgrade or restore a new firmware of the same modem type.
These are my modem details.
UTSTARCOM WA3002G4 Device Info.png

 

[essbebe]

See my sticky post above.Connect in always On mode. Use google dns 8.8.8.8 and 8.8.4.4Presume all phones connected ONLY to ADSL splitter PHOne port. check Device info/statistics/ adsl and report snr attn data.Firmware is latest.

 

[skdonweb]

How to use the file (may sound silly but genuine question)? I checked the link - "for WIFI bsnl Firmware (UTSTARCOM WA3002G4 other Country's ) URL is :- TJM-18.ep" and got a file with .ep extension.Never played with router so far. Now need it because BSNL advised me to throw the existing modem+router (WA3002G4) and buy a new one. So, want to try firmware update first. Not able to access router config page (192.168.1.1). Had tried reset before that and didn't work.

 

[Karthik Js]

Hello I have the UTSTARCOM WA3002G4 Router.And in order to use the WLAN I have to reset(restart) the WLAN by going the modem configuration page (192.168.1.1),every time I power off and power on my modem.How can I solve this problem??

 

[gill7588]

i hae installed firmware(wa3002g4) given in link.modem is working with ethernet cable but there is no wireless driver.can anyone send the link for wireless driver.

 

[madhu22]

can access internet only in lan mode but if i enable wlan except power led the remaining led toggles i.e reboots and i am not able to access internet (WA3002G4) i guess need firware TJM-18-002 .need help