weird problem..wifi modem

  • Thread starter Thread starter drunkdevil
  • Start date Start date
  • Replies Replies 12
  • Views Views 4,454

drunkdevil

Newbie
Messages
9
Location
NA
ISP
bsnl
hi..recently i m facing a really weird problem. i hav a zte wifi modem from bsnl. d problem is i cannot access my modem settings page i.e.192.168.1.1 bt my net is perfectly working. derz no firewall issue, i've checked dat. im using vista..i've even tried connectin thru ethernet bt still am not able to access dat page..d net on ethernet too works fine...any1 any solutions/suggestions??thanks
 
@members/drunkdevil/Welcome to Broadbandforum.in.If working fine , save all settings , before making changes in the settings,after accessing the modem. Since you say 192.168.1.1 cannot be accessed please post ipconfig/all data.Start RUN type cmd type ip/config/allWe need to know the default gateway.
 
http://img402.imageshack.us/my.php?image=82088972nh8.jpg

http://img402.imageshack.us/img402/5754/82088972nh8.th.jpg
 
Enable DHCP. in modem. ( sorry not possible now )Netbios over TCP/IP default. ( in TCP/IP properties advanced )Start/Network/Local Area Network/ PropertiesSelect TCP/IP PropertiesSelect Advanced select WIN see the bottom . disable IPV6.( later if needed . not now. ) How you connect Dialup mode or "always on "what is the ID and password you use for accessing modem ?
 
sorry noobie quest- how to enable dhcp?

i've disabled ipv6

Enable DHCP. in modem. ( sorry not possible now )
Netbios over TCP/IP default. ( in TCP/IP properties advanced )
Start/Network/Local Area Network/ Properties
Select TCP/IP Properties
Select Advanced
select WIN see the bottom .

disable IPV6.( later if needed . not now. )
How you connect Dialup mode or "always on "
what is the ID and password you use for accessing modem ?

id-admin
pass- admin
 
UPDATE: Problem:Unable to access modem zte zxdsl modem settings.
connecting to Internet fine and able to surf OS VISTA.
/members/drunkdevil/

1.Did you select default value for Netbios settings ?
2.How you connect: Using dialer ?
 


UPDATE: Problem:Unable to access modem zte zxdsl modem settings.
connecting to Internet fine and able to surf OS VISTA.
/members/drunkdevil/

1.Did you select default value for Netbios settings ?
2.How you connect: Using dialer ?

yup d settings fr netbois is set a default.. n i access my internet thru wifi(same modem)
 
@members/drunkdevil/
2.How you connect: Using dialer ?
.1.Do you use a wanminiport dialer to connect to Internet
..2.or when system is switched on , modem automatically connects to the net ?
...3. Anytime earlier could you access the modem zxdsl 831Aii modem's setting pages ?
 
1.nop i dont use anytype of dialer...2. yup it automatically gets connected when d system is switched on3. yup few days ago i was able to access dat page.
 

Back