Airtel Broadband: Port Forwarding In Beetel 220bx

[waterloo_sunset]

Well with the firewall enabled, all incoming traffic is blocked and u have control over what to allow with port forwarding. So when u disable it, ur comp is potentially exposed to hack attempts, malware etc. so it depends on what is more important to you, security or ease of use.

 

[rajeevsharma8888]

It's still not working !What kind of setup, you guys wanted to know ?

 

[superprash2003]

is your 192.168.2.1 router in bridged mode?? and your beetel in ppoe mode?? or the other way round?>?

 

[rajeevsharma8888]

beetel =pppoe,router =don't know ?

 

[essbebe]

@raajeevsharma8888
1.Mention model/make of your Wifi router.
2.confirm PF setup in Beetel 220Bx is working fine.
3."QUICKFIX" change Rj45 cable from Beetel 220Bx
to wifi router any LAN port instead of WAN port !
4. Feedback.

REF:Omniscience: Port Forwarding in Airtel Modem Beetel 200BX

http://portforward.com/english/routers/port_forwarding/Dlink/GLB-502T/Eyeon.htm

 

[rajeevsharma8888]

1.Mention model/make of your Wifi router
=Netgear WGR614v6

2.confirm PF setup in Beetel 220Bx is working fine
=How do i confirm this ? when it's not working ! Do you want me to connect the laptop directlt to beetel 220bx without Wifi ?

3."QUICKFIX" change Rj45 cable from Beetel 220Bx to wifi router any LAN port instead of WAN port !
=but that way internet won't work at all, i guess ! (I haven't tried it, but that'smy guess, so will try it now)

 

[perryizgr8]

hi rajeev, i'm using the same wifi router as you are and the same modem too but on airtel broadband. even when all the settings seem correct port forwarding just does not work. i have confirmed that separately both routers are forwarding correctly but when used together, they mess up. have you found any solution?

 

[essbebe]

@perryizgr8
i have confirmed that separately both routers are forwarding correctly
SAME COMBINATION HERE. . 110bx1 AND WGR614v6.
Please explain how you checked PF with wifi router.

 

[perryizgr8]

@perryizgr8

SAME COMBINATION HERE. . 110bx1 AND WGR614v6.
Please explain how you checked PF with wifi router.
i connected two laptops and a wifi cellphone to the wifi network and set up a server on one of them. i was able to access the server from the other laptop and the phone too. so i guess it means that the wifi router is forwarding correctly. also, i have 220bx adsl router and wgr614v7 wlan router.

----------

now there seems to be some wierdness. earlier(1 day ago) when i connected my pc directly to bx220 and set up port forwarding, it worked good. just now i tried it again and its not working. i suppose there is a bug in bx220, it works sometimes and not other times.

 

[essbebe]

i connected two laptops and a wifi cellphone to the wifi network and set up a server on one of them.

Explain whether LAN1 LAN2 ports of WGR614 , were used for the laptops.
1.Which application you need to do Port forwarding / port Nos ?
2.or
you are hosting a WEB server ?

3. How do you connect / In "Dialup Mode " or "Always On " mode.

4. Presume Beetel 220BX+WGR614 both were connected when you accessed the "server"

5. Please mention OS used is XP. or LINUX when trying a set up.
Not familiar with Linux OS.