Airtel Static IP - Setup Guidance

[Hitori_Abhito7]

@IfranAli who are these "they"? TP-Link or ISP techs? Also, we are anyways bypassing their modems and inturn breaking "ToS" na?

 

[IfranAli]

@Hitori_Abhito7 TP-Link Senior Technicians.

 

[akshay71]

Dude replied to me that he was taking his dogs out for a walk and then disappeared completely. So we will never know if he figured things out or…

 

[gayad]

Hey hey @akshay71
Got bombarded with a whole lot of work, onboarding a client in the VR HW space.
Couldn't go offline as there were back to back meetings.
As I am typing this, I am connecting G3V1 and will give the first go.
Will update shortly I hope it goes through.

 

[gayad]

Didn't work yet. @akshay71 the options on the onu_sn.htm are quite different.
Heres all the permutations and combinations I've tried. (G3V1)

Vendor ID: ALCL
Serial Number: 414c434cxxxxxxxx
ONT version: 3FE48299DEAA / "None"
Main software version: 3TN00391IJLJ07 (Resets to V3.1.4 on save)
Stanby software version: 3TN00391IJLJ07 (Resets to V3.1.4 on save)
Card holder type: 3
Equipment ID: G-2425G-A / "None" (Swapped his & ONT version too)
OMCC version: 0x80/0x86/0xA1
Traffic management options：2/0

Also tried @hariselio config, that didn't work either.
Neither did GeekyBros Vid settings work.
Vlan Scan fails, Tried all on Transparent/ControlByOLT/VlanTag.

Wondering where's the issue is.

 

[gayad]

I am thinking, is it because of my G3V1 model? It's a G3Eu1V1.
Patched on Brazil fw. XZ000-G3(BR)_1.0_Build 230710
Can that be the cause?

Noticed on the Ukraine site, there is XZ000-G3(EU1)v1 _3.1.4 Build 230704 dated 2024-01-05

 

[gayad]

Did all the same with V2 as well.
O5, but no luck with Vlan Scan, just doesnt work no matter what.

 

[akshay71]

Software 1 and 2 are important for ALCL OLTs

 

[hariselio]

@gayad have you tried all settings as it is from the the screenshot I shared? Change only the serial number and keep rest all as it is including vendor I'd HWTC.

 

[gayad]

@hariselio yeah brother. Everything exactly from the pic you shared but no luck.
Vlan scan wont work.