Are VoIP Services or SIP Settings available in Airtel Xstream Fiber Broadband?

[Arunesh Dutta]

Hello all wanted to know is there any VOIP settings for AIRTEL xtreme fiber users if so how to access same using SIP settings ..thx

 

[rajil.s]

For Lucknow the upstream servers are at 10.232.133.130 and 10.232.134.130, and the sip password is the same as mentioned previously. These servers dont accept an expire time less than 3600 seconds. I had to setup a sip 'Options' request every 30 seconds to keep the connection alive.

 

[mayank yadav]

You just need to bind a port to VLAN 660 like so. The traffic will be untagged on LAN2. Then on your downstream router, mimic the ip settings given to you by Airtel for VOICE.

View attachment 3444

Have you used LAN2 for your bridged internet also?

 

[rajil.s]

You can only untag 1 vlan at a time. So if you untag 660, then you cannot untag 100/internet.

An alternative is to keep them tagged, and untag on the downstream router.

 

[nehalahmad15@gm]

Great news I figured it out on android device currently worked on Zoiper. Thanks, guys

 

[sloj]

@nehalahmad15@gm Just once or have you tested multiple times.

 

[nehalahmad15@gm]

Tested multiple times. all thanks to your post

 

[sloj]

I would like to know if anything you did differently. I haven't done much tests on Android.

 

[nehalahmad15@gm]

These are the setiings

Username-<phonenumber>
passwrd- Huawei@1
Authid- [email protected]
Outbound Proxy - Standby proxy

There are still issues that was happeing from yesterday like call not coming or goin sometimes untill I register again
Do you why?

 

[sloj]

Ya, that is the issue. I can call okay for the first time after starting zoiper or any other app. It's a Symmetric NAT issue from what I found searching the web. Restarting the app or waiting for the registration period to expire and register again fixes it. If you call instantly after the first call, there will be one way audio issue. YATE and MicroSIP have implemented methods to overcome this but other apps haven't.

 

[nishant2400]

Hi can you guys please share settings to be configured in Nokia ONT. My wan settings does not have voice profile still voice shows registered.