BSNL Broadband: Cannot Able to PortForward UTStarcom:WA3002G4
- Thread starter Herojith
- Start date
- Replies 17
- Views 4,896
From your Post No 1:
You can see this for full instructions
Help ?
If you are on "Bridged" dialer mode enter your computers IP address 192.168.1 2
All ports are open !
If you are on "Always On" PPP PPPoE mode
( UserID PW stored in wan page of modem )
look for port triggering menu.
Check this link for getting Other options under NAT
Hardware board is same.
You can see this for full instructions
Help ?
If you are on "Bridged" dialer mode enter your computers IP address 192.168.1 2
All ports are open !
If you are on "Always On" PPP PPPoE mode
( UserID PW stored in wan page of modem )
look for port triggering menu.
Check this link for getting Other options under NAT
Hardware board is same.
Last edited by a moderator:
thank u it works but how can i make static ip what i meant was my ip changes dynamicly on What Is My IP Address - Shows Your IP Address when modem each time re-set it is possible to set static ip i have that function on router but don't know how to use it 
thank u it works but how can i make static ip what i meant was my ip changes dynamicly on What Is My IP Address - Shows Your IP Address when modem each time re-set it is possible to set static ip i have that function on router but don't know how to use it
stn
say website A reaches Bsnl Gateway 117.12.12.12
then it allots ip dynamic to you say 117.33.33.33 can change.
which in turn goes to 192.168.1.1 ( Your modem's
redirected to 192.18.1.2 your computer's IP. considered static IP(Pseudo static IP).
IF IT WORKS DON'T REPAIR !!!!
stn
say website A reaches Bsnl Gateway 117.12.12.12
then it allots ip dynamic to you say 117.33.33.33 can change.
which in turn goes to 192.168.1.1 ( Your modem's
redirected to 192.18.1.2 your computer's IP. considered static IP(Pseudo static IP).
IF IT WORKS DON'T REPAIR !!!!
Can You make a Picture Tutorial
Or Explain Easy Way?
Start RUN type cmd OK
New window
type ipconfig /all
Copy paste the data here without editing.
Mention the applications/ you want to Port forward and their port numbers
You should be connected to internet in "Always On" PPP/PPPoE
Upload screenshots of the Port triggering virtual server menu pages, with whatever entries you have made.
same menu pages:
Download TeamViewer and PM userId and PW to me or @meetdilip to access your modem to make the settings.
( when ONLINE)
Or Explain Easy Way?
Start RUN type cmd OK
New window
type ipconfig /all
Copy paste the data here without editing.
Mention the applications/ you want to Port forward and their port numbers
You should be connected to internet in "Always On" PPP/PPPoE
Upload screenshots of the Port triggering virtual server menu pages, with whatever entries you have made.
same menu pages:
Download TeamViewer and PM userId and PW to me or @meetdilip to access your modem to make the settings.
( when ONLINE)
Last edited by a moderator:
confirm you need Port forward settings for WA 3002 _g4?
Mention application Utorrent Bit torrent etc.
Or looking for "STATIC" IP ?
similar modem
A guide to port forward Beetel 220BX
Confirm you are connected to Internet automatically now.
( no Dialer" where you enter UserID and PW)
Mention application Utorrent Bit torrent etc.
Or looking for "STATIC" IP ?
similar modem
A guide to port forward Beetel 220BX
Confirm you are connected to Internet automatically now.
( no Dialer" where you enter UserID and PW)