BSNL Broadband: Dlink Glb-502t Help Page

[harman163]

QUOTE(new guy @ Oct 10 2006, 09:24 PM) [snapback]64795[/snapback]
coolguygprs even with enabling DMZ , i am still not able to download. [/b]
Try to use a bridge mode and test it.

 

[desicooldude]

QUOTE(harman163 @ Oct 10 2006, 10:50 PM) [snapback]64815[/snapback]
Try to use a bridge mode and test it.
[/b]

still not able to download. a friend on mine suggested that bsnl could be blocking some ports, thats why i am able to browse and not download.

 

[harman163]

QUOTE(new guy @ Oct 11 2006, 08:34 AM) [snapback]64850[/snapback]

still not able to download. a friend on mine suggested that bsnl could be blocking some ports, thats why i am able to browse and not download. [/b]
BSNL isnt blocking anything and does every file stops at 90%.If u have configure everthing fine,than most probably thats ur windows problem.

 

[desicooldude]

QUOTE(abhibh @ Oct 11 2006, 12:57 PM) [snapback]64863[/snapback]
Hi dude. this is problem in bsnl exchange at your area. I was also facing the same problem it got ok after 2 days of struglling.

As of now the same problem has started again all over chandigarh here (confirmed with frnds).
[/b]

thank god i am not alone. this reply i got from another thread. now i have to struggle, for god knows how many days to make the bsnl people to repair the problem. thanks for the help guys

 

[ujjalsheikh]

Hi all, just wanted to share my experience on the GLB502T. Recently, a friend of mine (a GLB502T user) told me of a similar problem that many of you have mentioned of. He too was very dissatisfied with the device.While helping him, I too tried everything at my end (configuration and stuff) including the MAC address idea but nothing seemed to work. daddykazaa also mentioned of a heating problem & that he placed his modem vertically which seemed to have resolved his problem.So I tried analyzing this: the modem would work better and longer when powered on for the first time & then disconnect. To reconnect, the device had to be left powered off for a while. & the process followed….Now I was sure that it was because of heat. I removed the top cover of the device, located the Chip(IC) that was getting hot and placed a few coins above it (to absorb the heat) and tried it. Trust me, the device is working without a single disconnect till date. (Now the coins are replaced by a heat sink).Note: Some claim that they have been using the modem in Air Conditioned rooms. Air conditions don’t give us the liberty to use our computers without the CPU fans, heat sinks and absorbents because of amount of heat dissipated from them. So… air conditioned rooms are not the answer to this problem.Thanks daddykazaa!!! You helped me resolve the problem.

 

[seshu]

^ Ujjal , pls give us details of the heat sink .material , size , shape and how to add it ...

 

[qawa]

hi harmani m having glb-502ti m having exactly same problem you had.my modem is not working even in bridge mode.line busy message comes.can you please help me.thanks

 

[seshu]

^ qawa , pls give the exact error message .
including error number (if any) ...

 

[qawa]

hiactually i just bought a new glb-502t adsl router modem. and installed it via usb cable on win xp(sp2).then i configured modem via its console as bridge with vci value 35. and saved restarted. after that i made a new dialer connection for broadband but got message phone line is busy.assist me plz

 

[seshu]

^ GLB-502T has in-built splitter - right ?pls check setup of the cables . are theyconnected according to the user's manual ...