BSNL Broadband on Linux

[essbebe]

C2110 USB DRIVER INSTALLATION for XP.
Very remote chance for usb drivers for use with LINUX/ubuntu.
Better to buy a new ethernet card !

 

[greenstar4]

i too have this same problem all i go do is restart modem and redial. although its no frequent but it can occur anytime this problem started when i started using unlimited from 250 home ... is this problem anywhere connected with port binding of unlimited users

 

[rahimveron]

Any help in configuring Dataone in openSuse 11.0?

 

[sdzahed]

Hello I recently subscribed to bsnl's dataone broadband. It works fine from win xp, but i am unable to figure out how to get it working in linux. I have tried everything that has been said in this thread but still cant get it to work.
My modem is siemens c2110 and its in bridge mode.
I have tried using pppoeconf and when that didnt work i also used rp-pppoe. After the initial setup when i tried doing pon dsl-provider, the output from plog said that it timed out. When i tried pppoe-start the output is as follows:

# pppoe-start
................TIMED OUT
/usr/sbin/pppoe-start: line 193: 8861 Terminated $CONNECT "$@" >/dev/null 2>&1

#pppoeconf

# pon dsl-provider
Plugin rp-pppoe.so loaded.

# plog
Jul 12 02:05:57 localhost pppd[9129]: Timeout waiting for PADS packets
Jul 12 02:05:57 localhost pppd[8841]: Timeout waiting for PADS packets
Jul 12 02:05:57 localhost pppd[8841]: Unable to complete PPPoE Discovery
Jul 12 02:05:57 localhost pppd[9129]: Unable to complete PPPoE Discovery
Jul 12 02:06:02 localhost pppd[9468]: Timeout waiting for PADS packets
Jul 12 02:06:02 localhost pppd[9468]: Unable to complete PPPoE Discovery
Jul 12 02:06:04 localhost pppd[9489]: Plugin rp-pppoe.so loaded.
Jul 12 02:06:04 localhost pppd[9490]: pppd 2.4.4 started by root, uid 0

I am using debian etch and the output of some commands are as follows:

# uname -r
2.6.18-4-686

# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:16:76:C6:FC:CC
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::216:76ff:fec6:fccc/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:31 errors:0 dropped:0 overruns:0 frame:0
TX packets:60 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2841 (2.7 KiB) TX bytes:5940 (5.8 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:53 errors:0 dropped:0 overruns:0 frame:0
TX packets:53 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:18653 (18.2 KiB) TX bytes:18653 (18.2 KiB)
ppp0 Link encapoint-to-Point Protocol
inet addr:117.198.148.166 P-t-P:117.198.144.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1460 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:302 (302.0 b) TX bytes:54 (54.0 b)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
117.198.144.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0

# lspci
00:00.0 Host bridge: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 945G/GZ Express Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
04:08.0 Ethernet controller: Intel Corporation Unknown device 1094 (rev 01)

# lsmod
Module Size Used by
binfmt_misc 10984 1
i915 17600 2
drm 61332 3 i915
ppdev 8676 0
lp 11012 0
button 6672 0
ac 5188 0
battery 9636 0
ipt_TCPMSS 4096 1
xt_tcpmss 2336 1
xt_tcpudp 3136 1
iptable_mangle 2880 1
ip_tables 13028 1 iptable_mangle
x_tables 13316 4 ipt_TCPMSS,xt_tcpmss,xt_tcpudp,ip_tables
pppoe 13152 2
pppox 3688 1 pppoe
ppp_generic 25908 6 pppoe,pppox
slhc 6528 1 ppp_generic
ipv6 226016 12
nls_cp437 5920 2
vfat 11872 2
fat 46684 1 vfat
nls_iso8859_1 4256 4
ntfs 192564 2
dm_snapshot 15552 0
dm_mirror 19152 0
dm_mod 50232 2 dm_snapshot,dm_mirror
loop 15048 0
snd_hda_intel 17332 2
snd_hda_codec 137856 1 snd_hda_intel
snd_pcm_oss 38368 1
snd_mixer_oss 15200 1 snd_pcm_oss
serio_raw 6660 0
snd_pcm 68676 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 20996 1 snd_pcm
parport_pc 32132 1
parport 33256 3 ppdev,lp,parport_pc
i2c_i801 7468 0
psmouse 35016 0
intel_agp 21148 1
agpgart 29896 3 drm,intel_agp
rtc 12372 0
i2c_core 19680 1 i2c_i801
pcspkr 3072 0
snd 47012 8 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 9248 2 snd
snd_page_alloc 9640 2 snd_hda_intel,snd_pcm
tsdev 7520 0
evdev 9088 1
ext3 119240 1
jbd 52456 1 ext3
mbcache 8356 1 ext3
sd_mod 19040 7
ide_cd 36064 0
cdrom 32544 1 ide_cd
usbhid 37248 0
ata_piix 13576 6
libata 89396 1 ata_piix
scsi_mod 124168 2 sd_mod,libata
piix 9444 0 [permanent]
e100 32232 0
mii 5344 1 e100
generic 5476 0 [permanent]
ide_core 110504 3 ide_cd,piix,generic
ehci_hcd 28136 0
uhci_hcd 21164 0
usbcore 112644 4 usbhid,ehci_hcd,uhci_hcd
thermal 13608 0
processor 28840 1 thermal
fan 4804 0


please help some one. Thanx for any help in advance.

regards.

 

[rahimveron]

^Which distro are you using?

 

[sdzahed]

I am using debian etch, and my kernel is 2.6.18

 

[bsnluser]

I am using debian etch, and my kernel is 2.6.18

From your ifconfig command, it appears you are getting connected and are also getting an IP address.

When you are trying to establish the connection using the 'pon dsl-provide' command (first do 'poff -a' to terminate any open connections and power cycle the modem and wait for modem lights to stablize), what do you get in /var/log/syslog file? Please copy and paste the relevant lines here.

Also, post the contents of /etc/network/interfaces file here.

 

[Trojan]

Can anyone please provide the sonfiguration in WIndows , I cant seem to configure the modem . The LAN stays connected but when I try to login , it says : "Error 687 : Remote computer didnot respond" . Please someone help !!!!!! :frown:I am suing modem C2110 , black , Nokia-Seimens !!!!

 

[prakash_mvpa]

to all who are on Ubuntu or any Debian based distros :first make sure your broadband connection is reaching to you:
try "pppoe-discovery".if it says "timeout waiting for PAD0 packets etc" ,then problem is with exchange.
@sdzahed :man ,remove that rp-pppoe package first."pppoeconf" is rp-pppoe only.

in bridge mode ,run pppoeconf and configure. then "pon dsl-provider" to connect and "poff" to disconnect.
if after connecting also(ppp0 shown in ifconfig output) you cannot ping any sites ,do this:

route add default ppp0

^open a terminal and as root(su) or as "sudo" in ubuntu.

good luck :cool2:

 

[varkeyeldo]

hello, im a windows user. now im swithcing to linux, fedora 9. my connection mode is Bridge mode with D-Ling GLB-802c modem. can anybody please help me in configuring connection with bsnl from fedora.