Bsnl modem for other isp

  • Thread starter Thread starter bcaramu
  • Start date Start date
  • Replies Replies 15
  • Views Views 5,491
thanks.. will try out.
 
hi.. i had asked for help in configuring bsnl modem with reliance wimax connection. it seems, it's not possible or that no one on the forum is aware of how to do that... :(thanks anyway for your help.
 
hi.. i had asked for help in configuring bsnl modem with reliance wimax
connection. it seems, it's not possible or
that no one on the forum is aware of how to do that... :(
thanks anyway for your help.

For a stand alone wifi router. try lan1 & lan2 for your unit.
img7.imageshack.us/img7/593/02102010003.jpg
step 9 in wireless page.

Default Configuring Linksys WRT54G Wifi Router for Reliance Wimax
1. Connect the ethernet (RJ-45) cable (white colour) coming out from
Power over Ethernet (POE) to WAN port of the router. At back side of
the router your can see 5 RJ-45 ports, out of this 1 for WAN and rest 4 for LAN.

2. Connect your network card of desktop pc or laptop to any of the LAN port of the router.
3. Switch off the power to POE


4. Go to >>>Control panel >> Network >> Local Area Connection >>> Properties >>>
Internet Protocol (TCP/IP) >>> Properties >>> Select obtain IP address automatically.
5. Go to Command prompt and type ipconfig/all you should get the details as below

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.1.100
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1

6.Open your browser (IE / Firefox) and type 192.168.1.1
in the address bar and press ENTER

7. It will prompt for username and password type “admin”
for both username and password.
Now you are under settings page of your router.

8. Under Setup >>> Basic Setup ,
Change the Local IP Address from 192.168.1.1 to 192.168.1.2
(This is very important, because the Subscriber Station
(receiver or SS) will have ip address as 192.168.1.1 )

9.Under Setup >>> MAC Address Clone >>> Enable >>>
Click “Clone your PC’s MAC” . Then Save settings.
10.Switch on the power to POE and allow
atleast 2 mins to complete hand shaking.
11. Under Status >>> Router >>> you can see as below

Login Type: Automatic Configuration - DHCP
IP Address: 123.xxx.xxx.xxx
Subnet Mask: 255.255.xxx.0
Default Gateway: 123.xxx.xxx.1
DNS 1: 220.225.236.84
DNS 2: 220.225.236.85
DNS 3: 202.138.96.47
 
Hi,I have recently got a new Fiber connection , earlier i had BSNL connection with modem "model - AN1020-21. Type - WT", Now ISP has given me direct connection with LAN cable and username and Password, I want to configure the BSNL AN1020-21 Modem to multiple connections to connect on Multiple Desktops and Laptopns and also wifi.ISP name: Beam CablesI am using Mac Book Pro with Mac OS X lionwhen i am trying to configure BSNL AN1020-21 Type WT modern using http:192.168.1.1 I am not successful but when I am directly using the LAN cable provided by ISP I am able to connect to Internet.Appericiate your helpThanksNayeem
 


Back