F670Lv9.0 Telnet Access

@BornArcher8
  • Oh gotcha! went through the repo and was just in doubt about that
  • I know its in the ebill but have been struggling a bit to find it, what exactly is it called in the ebill as mine just has a field as account and its the same web ui number with _dsl, I'll check the airtel app tonight as well. Some people say its the relationship ID or something but is that valid for peeps like me who took the prepaid connection like 3 4 years ago or is it just for people converting from older connections to fiber.

    EDIT - Got my acc number from the app, should work for pppoe pass but need to try. Just another question to BornArcher, is there anything you wish you would've backed up or had screenshots of from default settings before unlocking the router?
 
Last edited:
I wish I had the screenshot of all the settings lol. But atleast we can just lock it anytime using the command I gave previously. So it's not a big problem.
 
@BornArcher8 I took multiple screenshots of WAN and VOIP and other stuff just in case haha, only thing I'm struggling with right now is the SIP account details to make landline work, not a big issue but just would be nice to have.

UPDATE - literally mins later lol, figured out the credentials for SIP for Jharkhand area users at least,
  • SIP Account -> +91<landline num without 0>
  • Authorization Username -> +91<landline num without 0>@bh.ims.airtel.in (bh is the state code for Bihar and Jharkhand also for some reason)
  • Password -> Nokia@1
 
Last edited:
@BornArcher8 thanks for the help, just trying to figure out this last bridge mode thing now, hopefully it works without having to deal with Airtel, will need to check by installing opnsense on proxmox most likely as I lack a lot of the hardware as well
 
Quick question, getting an unlocked F670LV9.0, but to use with either Airtel or Jio i would need to clone the serial no of the existing device.
Any idea how to go about doing the same to get Airtel working on F670LV9
 
@BornArcher8 Does this work. I tried using the ZTEonu.exe on my windows pc , but it just gives.
Does this work on Device Type F670LV9.0
Hardware Version V9.0
Software Version V9.0.10P18N3D
Boot Version V9.0.10P10N6


Source: GitHub - stich86/zteOnu: Little program that opens telnet on ZTE ONU\CPE
-----------------------------------
step [0] reset factory: ok
step [1] request factory mode: ok
step [2] send sq: unknown error Attempt retrying..(1/5)
-----------------------------------
step [0] reset factory: ok
step [1] request factory mode: ok
step [2] send sq: unknown error Attempt retrying..(2/5)
-----------------------------------
step [0] reset factory: ok
step [1] request factory mode: ok
step [2] send sq: unknown error Attempt retrying..(3/5)
-----------------------------------
step [0] reset factory: ok
step [1] request factory mode: ok
step [2] send sq: unknown error Attempt retrying..(4/5)
-----------------------------------
step [0] reset factory: ok
step [1] request factory mode: ok
step [2] send sq: unknown error Attempt retrying..(5/5)
-----------------------------------


Any idea if it works on Software Version V9.0.10P18N3D and if mac needs to be changed how do i do it in windows pc.
 
@Dushie not sure if it will work on new firmware but to make sure it works you need to change the mac of your lan or wireless adapter. To do it on windows pc you need to use wired (lan) connection as that mac can only be set on windows in wired connection.

If you want to set that mac for a wireless adapter you need to use linux.
 
You must log in or register to reply here.

Similar threads

D
Got Telnet access on RL841GWV-DGB
Replies
0
Views
33
DerpBoy
D
VKopfr
Jiofiber (jcow411 os 2.30 telnet access)
Replies
3
Views
68
mastershif
mastershif
M
How to access telnet on ZTE ZXHN F660 v7.1
Replies
2
Views
51
muthumoon2957
M
ghostrox69
Successful Telnet access on ZTE F670L router and unlock
Replies
2
Views
268
Dushie
Dushie
Back