Firmware Upgrade for UT300R2U

[probuddha]

Hello Friends,

Is it safe to upgrade the firmware of my modem UT Starcom 300R2U through the firmware provided by BSNL?

http://ssss-multiplay.bsnl.co.in:8080/ssssportal.war/firmware.zip

I read in several threads that this upgrade screwed up the modem of lots of users, so I am very much apprehensive about trying this out.

Has anyone from this forum tried upgrading their firmware, is it okay or should I avoid doing it completely?


Thanks!

 

[amish]

Dont know if firmware is good or bad, but if ur modem is working fine then why upgrade?

 

[probuddha]

Ya it's working fine now....so I better avoid upgrading it.Was just curious to know whether anyone has done it and if there are any added benefits in upgrading it.Thanks

 

[Deleted member 10390]

Some members have reported that the firmware upgrade using BSNL self care software is faulty. Better avoid it or try a different source.

 

[essbebe]

1.
BSNL Ut300R2U new model does not have Under Advanced options
under NAT: Virtual server/port triggering options.
( In PPP/PPPoE mode )
usually needed for Port forwarding torrent sites.

2.
Please download the firmware and upload at ziddu.com or link-removed.
Unable to access link given by you.

3.
The hardware board is same as Beetel 220BX and many have tried to use its FW
but mostly resulted in a "dead" unit.!!
Try at YOUR OWN RISK !!

4.
IF IT WORKS DON'T REPAIR!