Help with TP-Link XZ000-G7 Gigabit XPON Terminal Configuration for BSNL FTTH

[Gowtham66]

GPON @tr1k0N4

 

[tr1k0N4]

Then it should work! Clone the correct GPON SN, brdr!

 

[Gowtham66]

How to find if TP-Link xz000 g7 is receiving the fiber signal?? I am sure that the fiber cable is connected but no signal is accepted by the onu. Since I bought a refurbished one from Amazon @tr1k0N4

 

[tr1k0N4]

Are you plugging a blue cable in the green port?

 

[Gowtham66]

Actually the onu itself is a faulty one. Bought a new today. Working as expected now. Thank you @tr1k0N4 . Now there is one more issue. I am currently using Deco M4 and dailing pppoe from it. I have a Netlink router provided by isp. It fell on the floor several times which made pon damage and even when I connect the patch cable it is showing LOS. Blinking red. Now I want to make this netlink work as main router by dailing pppoe from it . TP-Link is forwarding packets through bridge mode vlan tag mode and ethernet cable is connected to netlink and I want to dail pppoe from netlink. Is this possible? @tr1k0N4

 

[tr1k0N4]

If you Netlink allows you to change the upstream port from PON to one of the LAN ports, then yes, otherwise no.

 

[Gowtham66]

There is no change option

 

[tr1k0N4]

Then you can't use it anymore!