How to configure LINKSYS WAG200G with MTNL broadband ?

[uncommon]

Hi, I have a Linksys WAG200G router but i m unable to configure it with my mtnl broadband connection . if somebody is using this router pls put the screenshots for the same.thanks in advance

 

[y2s]

Im using MTNL wifi router but you have to configure using PPoe I think.

 

[uncommon]

Im using MTNL wifi router but you have to configure using PPoe I think.

Presently i m using MTNL MT882 router

But now i want to replace it with Linksys WAG200G... i tired all the configration settings as per mtnl website but unable to made it functional..

pls put the screen shots for all settings...


one more thing ... wht username and password i have to put inside the confige settings of ISP provider


how to log in the mtnl router --- username - admin , password - admin is not working .

 

[socrates]

Hi,


I have a Linksys WAG200G router but i m unable to configure it with my mtnl broadband connection . if somebody is using this router pls put the screenshots for the same.

thanks in advance

Check out Socrates even thought the models are different the funda's are the same.

 

[essbebe]

Presently i m using MTNL MT882 router
how to log in the mtnl router --- username - admin , password - admin is not working .

With Power On press RESET in the modem for about 20 or 30 seconds

VPI/VCI for MT882 0 and 32
Start Network LAN
properties
New window
Select TCP/IP
properties
enter
192.168.1.10
255.255.255.0
192.168.1.1
dns
8.8.8.8
208.67.220.220
APPlY SAVE.

Now try to access modem settings.
confirm you connect to Internet .
THEN
for
WAG200 ADSL modem +4LAN+WIFI router

WAG200g Linksys BASIC setup
REFERENCE:
Basic Setup

101.Encaspulation: rfc2516 PPPoE
102 Multiplexing...: LLC
103 Qos Type......... UBR
104.......

105 ......
106 Auto Detect :...Enable
107 Virtual Circuit..0 VPI
108 ....................... 32 VCI ( for MTNL )
109 DSL modulation: multiMode
( GDMT preferred)
110 Username ..... as given by MTNL
111. Password...... same as above

Rest No change now
120. Time settings IST not seen select GMT+05.00
121 try to edit to +0530 ( later)
122 or Time Interval 1800 seconds
125 save settings

Wait FOR A MINUTE.
( click Help for explanations if needed )
Numbers given for reference .
FEED back.



.

 

[uncommon]

With Power On press RESET in the modem for about 20 or 30 seconds

VPI/VCI for MT882 0 and 32
Start Network LAN
properties
New window
Select TCP/IP
properties
enter
192.168.1.10
255.255.255.0
192.168.1.1
dns
8.8.8.8
208.67.220.220
APPlY SAVE.

Now try to access modem settings.
confirm you connect to Internet .
THEN
for
WAG200 ADSL modem +4LAN+WIFI router

[color=\"BLUE\"] WAG200g Linksys BASIC setup[/color]
REFERENCE:
Basic Setup

101.Encaspulation: rfc2516 PPPoE
102 Multiplexing...: LLC
103 Qos Type......... UBR
104.......

105 ......
106 Auto Detect :...Enable
107 Virtual Circuit..0 VPI
108 ....................... 32 VCI ( for MTNL )
109 DSL modulation: multiMode
( GDMT preferred)
110 Username ..... as given by MTNL
111. Password...... same as above

Rest No change now
120. Time settings IST not seen select GMT+05.00
121 try to edit to +0530 ( later)
122 or Time Interval 1800 seconds
125 save settings

Wait FOR A MINUTE.
( click Help for explanations if needed )
Numbers given for reference .
FEED back.



.
THANKS ... I WAS USING THE WORNG USERID AND PASSWORD.... It started working

 

---