How to Connect TP-XZ000-G7 to Airtel Xstream Broadband?

[Rickysin]

Got it. I will try that.

 

[Rickysin]

TP-Link xz000-g7 worked without converting to hex. Used ascii+hex option and voila ont was set to GPON status o5 i.e. registered.

getting much better speed with this xpon onu as compared to my Nokia ont.

rx power is -19.5
Tx power is 1.80

also form factor is soo small which is good

 

[tr1k0N4]

Brilliant @Rickysin! What router are you using?

 

[anmolbhard004]

YES ITS TOO GOOD.

 

[Sanemi]

Hi I'm considering to buy the TP-Link XC220 Xpon ont to replace the genexis platinum 4410 provided by the operator . I also spoke with the operator wheather it will support and told me that it won't and they told me to buy genexis branded modem . Will it work by cloning the GPON serial number and mac address?

 

[Rickysin]

@tr1k0N4 i am using TP-Link ax10 router

 

[droidrex]

@Rickysin so you are getting better speeds on ax 10 when bridged via TP-Link onu compared to Nokia airtel bridge?

 

[Hitori_Abhito7]

@Rickysin Sir can you post screencap of the ax10 to show how you connected? I'm still not able to sign in pppoe. I tried setting VLAN 100 in onu (same model) aswell as IPTV setting of my archer a6.
The registered is the same O5. As of now the VLAN setting in the G7 is in transparent mode as stated in that video's comments and I've filled in the necessary stuff in IPTV and Internet section in the A6

 

[tr1k0N4]

Brother @Hitori_Abhito7

Does the Archer A6 have the option to individually enable different VLANs? Like e.g., since you have the G7 in transparent mode, you only need to enable Internet VLAN and VoIP VLAN on your router, as shown below:

 

[pjgowtham]

@tr1k0N4 What if we put the G7 in tagged mode to VLAN 100 ?

Do you have the above setup working with transparent mode in G7?