Lan help pls

[powerplay100]

I used to connect using usb to my modem.i now want to do so using ethernet cable.i have d/l ethernet drivers.when i connect ethernet wire to my computer the icon on taskbar says network cable is unplugged.is this bec of driver prob or any hardware prob like faulty cable etc

 

[socrates]

Which modem are you using. :huh:

 

[powerplay100]

beetel

 

[essbebe]

I used to connect using usb to my modem.i now want to do so using ethernet cable.i have d/l ethernet drivers.when i connect ethernet wire to my computer the icon on taskbar says network cable is unplugged.is this bec of driver prob or any hardware prob like faulty cable etc

Mention Modem model and make as well as the ethernet card details.
Start All programs Accessories Communications
Network connection Wizard.
create a LAN net work.
If link with screen shots are needed , respond.

Start Network LAN status ??
..................... Repair what is the error message?
Use 192.168.1.1 as Modem default Gateway ( ethernet connection )

 

[Shashank80]

I think I have also been provided with this modem. It has a major fault. In Windows XP you have to configure the Network Card (NIC) to use Line Speed/Duplex Mode to 10Mbps/Full Duplex instead of Auto Negotiation or 100Mbps/FulDuplex.In Vista it runs well.In Linux (Kubuntu) it has not yet run with any success.Is it a firmware problem? I saw thus somewhere. Can it be rectified permanently with a firmware upgrade?Product Information Page in Status tab of Modem showsroduct InformationModel Number AR7WRDHW Revision UnknownSerial Number *************USB PID 0x6060USB VID 0x0451Ethernet MAC *:*:*:*:*:*DSL Default MAC *:*:*:*:*:*USB MAC *:*:*:*:*:*USB Host MAC *:*:*:*:*:*Software VersionsGateway 3.7.2ATM Driver 7.02.01.00DSL HAL 7.02.01.00DSL Datapump 7.02.03.00 Annex ASAR HAL 01.07.2cPDSP Firmware 0.54Boot Loader 1.4.1.5