Making landline calls from softwares like GS Wave...

[Harry2003]

I want to make calls from my phone using my landline number from home. I am not able to figure out how to set up VoIP client side. I have a Netlink ONU. In it, I have a separate wan connection for voice along with the internet. I want to be able make calls from Wifi connected local devices.
Voice connection is configured in route mode with VLAN and Dhcp enabled in NAT4. The service mode is set to voice. Also, I have all the below-mentioned details in my VOIP settings. But I'm not able to figure out how to connect it to any VoIP sip client like GS Wave.
I don't have much knowledge about these kinds of things. Please help me out.

 

[NikhilS]

Duplicate thread

Please use the search filter: you will land on this thread: Possible to use the SIP/Voip from voice on FTTH with Freepbx or something similar? | BSNL Bharat Fiber

 

[Harry2003]

@Nikhil Sharma That thread focuses on making calls form outside home network.
I want to make calls from my network. I could find anything.

 

[varkey]

@Harry2003

Possible to use the SIP/Voip from voice on FTTH with Freepbx or something similar? | BSNL Bharat Fiber Broadband

hello , I am using excitel connection in bangalore and was able to configure bsnl wings in my router . i am getting incoming calls but not able to dial. . i think i have to make some changes in my voip basic / advanced settings . Please help

broadband.forum

It's for home network itself.

 

[Elavarasan]

@Harry2003 check this out this may help you.

Using a Soft VOIP phone Client with BSNL | BSNL Bharat Fiber Broadband

I was trying to get a soft voip phone to work under these credentials of BSNL IP phone ....Like if we throw in the exact configuration on a Soft dialing app ..we might be able to make and receive calls...Can someone help me out on this

broadband.forum