NAT problem in AZEURUS

[coolo_libran]

I am facing NAT problem with Linksys WRTG45 router in application azeurus. I have check portforward.com and followed all the steps they have mentioned but still NAT/firewall test fails in azeurus. Please tell me what shud i do? I have no firewall active in my sys.....

 

[essbebe]

Do you use a separate modem ( like Beetel220BX ) with the WRT45 router ?Sorry for the question, because i am not sure whether Linksys WRT45 has built in adsl modem.Anyway in a hurry to go out now, and will try to reply to you again.

 

[coolo_libran]

Ya i am using a seperate beetel modem as this router does not have any modem inbuilt.

 

[Karan]

Well then have you also NATed the ports on the modem?

 

[essbebe]

I have port forwarded for a program called Echolink.
Please see the screen shots and try without router first.






My modem: Beetel 220Bx adsl2+modem

 

[coolo_libran]

Thanks buddy for the reply but without router it works fine....

problem is with router.......

mine modem is also Beetel 220Bx adsl2+modem but I dont have any advance setting tab

http://img165.imageshack.us/img165/7880/untitledmk4.jpg

 

[essbebe]

Please try 192.168.1.1/main.html for the advanced setup In the screen shot it is seen
http://i4.tinypic.com/5y2f8ds.jpg

 

[coolo_libran]

thanks essbebe atlast my problem got solved.....Thanks a lot