Need help Downgrading c2110 for Port Forwarding

[cypherking]

Switch to bridge mode. All ports are open by default. Make sure you use a good firewall.

Alright, how do i do that? I am currently configured according this page C2110 (Type-A) ADSL MODEM MULTIUSER CONFIGURATION

 

[essbebe]

Alright, how do i do that? I am currently configured according this page

C2110 (Type-A) ADSL MODEM MULTIUSER CONFIGURATION
Uncheck "PPPoE" and select "bridged" Apply Save REboot
In same website " dialer " set up is given.
Did you try from another system/computer ?
for future ref
Port Forwarding Call of Duty 4 on the Nokia Siemens C2110 - PortForward.com

 

[cypherking]

Port Forwarding Call of Duty 4 on the Nokia Siemens C2110 - PortForward.com

I read that, whether I use Protocol/Type - UDP or ALL it doesnt matter..
The only difference in using ALL is that if I use ALL, I have to only add a single rule with ALL in Protocol/Type -- It doesnt use the port values given-- and all the ports will be opened...
If I use UDP i have to add rule all three rules individually.
But anyways..
Uncheck "PPPoE" and select "bridged" [COLOR=#475E8C !important]Apply[/COLOR] Save REboot
In same [COLOR=#475E8C !important]website[/COLOR] " dialer " set up is given.
Did you try from another system/computer ?
Thank you that worked perfectly....I can now see my server on xfire with an external ip :Boy Yahoo:.
the dialer software I assume is the PPPoE client? it didnt install..i had setup a connection manually but it worked.
I have uploaded the firmware versions V55.1.04.02 & V55.1.04.10 on medifire acc. if anyone may need in the future
Here is the link firmware_c2110.zip

 

[essbebe]

I read that, whether I use Protocol/Type - UDP or ALL it doesnt matter..
The only difference in using ALL is that if I use ALL, I have to only add a single rule with
ALL in Protocol/Type -- It doesnt use the port values given-- and all the ports will be opened...
If I use UDP i have to add rule all three rules individually.
But anyways..

Thank you that worked perfectly....I can now see my server on xfire with an external ip :Boy Yahoo:.
the dialer software I assume is the PPPoE client? it didnt install..i had setup a connection manually but it worked.
I have uploaded the firmware versions V55.1.04.02 & V55.1.04.10 on medifire acc. if anyone may need in the future
Here is the link firmware_c2110.zip

Congratulations.
NO portforwarding needed if you use Dialer and connect to Internet !
Al ports are open ( Use Firewall and AV applications !!)
If you open the menu pages PF menu will not be seen !!! confirm.

Thanks for the upload. noted for future use.