I changed my router 3 times, and none of them had a proper good range. So after knowing about bridge mode. I recently got archer. Here's the product link if anyone wants to check it out TP Link Archer AXE75
So following things happened after contacting airtel team through various mediums.
1. The same old 'static ip needed to configure bridge mode' is all i get from people who have called me.
Note:- I tried 121, [email protected], [email protected], twitter dm's, and even Consumer forum. All i got was the one point mentioned above.
Its almost 4 months, and no one from backend team has contacted me after trying a lot to reach them.
So now i've only two options
1. configuring myself - which i tried(from each of the forums related to this topic) and none of them worked.
2. Only thing now left is help from you people who could help me out.
Here are some of my ONT/ONU details (screenshots attached)
ONT/ONU Model
The firmware is cut to cut similar to the dragonpath one. I believe they have customized the firmware for the Alphion ONT/ONU as they normally do.
Note:- As the firmware is similar to the Dragonpath 707GR1 Model, i tried these forum's dragonpath 1 dragonpath 2 steps and what happens is that my old PPPoE just stops and no internet at all. Tried deleting the pppoe settings and then setting up the bridge mode settings and still nothing.
Please do help
So following things happened after contacting airtel team through various mediums.
1. The same old 'static ip needed to configure bridge mode' is all i get from people who have called me.
Note:- I tried 121, [email protected], [email protected], twitter dm's, and even Consumer forum. All i got was the one point mentioned above.
Its almost 4 months, and no one from backend team has contacted me after trying a lot to reach them.
So now i've only two options
1. configuring myself - which i tried(from each of the forums related to this topic) and none of them worked.
2. Only thing now left is help from you people who could help me out.
Here are some of my ONT/ONU details (screenshots attached)
ONT/ONU Model
The firmware is cut to cut similar to the dragonpath one. I believe they have customized the firmware for the Alphion ONT/ONU as they normally do.
Note:- As the firmware is similar to the Dragonpath 707GR1 Model, i tried these forum's dragonpath 1 dragonpath 2 steps and what happens is that my old PPPoE just stops and no internet at all. Tried deleting the pppoe settings and then setting up the bridge mode settings and still nothing.
Please do help