Problem with my UT300R2U Modem on bsnl broadband

[essbebe]

Ethernet adapter Local Area Connection 3:

Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Broadcom 570x Gigabit Integrated Con
troller ENABLE THIS
Physical Address. . . . . . . . . : 00-11-43-47-83-C6

Ethernet adapter Local Area Connection 2ISABLE OR CHANGE SETTINGS

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Cisco Systems VPN Adapter
Physical Address. . . . . . . . . : 00-05-9A-3C-78-00
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Autoconfiguration IP Address. . . : 169.254.18.31 incorrect IP address
Subnet Mask . . . . . . . . . . . : 255.255.0.0255.255.255.0
Default Gateway . . . . . . . . . : NOT SEEN-
DNS Servers . . . . . . . . . . . : 208.67.220.200
............................................ADD a BSNL DNS NUMBER

para 2:

in laptop
START NETWORK LAN
Disable connection 2 or make changes ( same as for connection 3 )
Enable Connection 3. Properties
TCP/IP
Properties
Select
IP address 192.168.10
subnet mask 255.255.255.0
Default GATEWAY 192.168.1.1

dns
208.67.220.220
208. 67.222.222

Check on top of page TCP/IP

ethernet card Configure enabled or not

Save APPLY.




Reconnect laptop/ computer

Does it connect now with laptop ?

 

[superprash2003]

do you use any other type of connection other than an ADSL one?? its strange that you are connected to 153kbps , its usually 10 or 100 mbps..

 

[tune2john]

Frnds,I have good news & bad news! :cool2:Good news is I got a new WIFI enabled modem from BSNL(WA3002G4). So now my connectivity problem is gone! I'm using WIFI to connect.The bad news is my laptop still fails to recognize the modem!!! :SCheck the ipconfig output below:Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/Wireless LAN 2100 3A Mini PCI Adapter Physical Address. . . . . . . . . : 00-0C-F1-5F-9B-38 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 Lease Obtained. . . . . . . . . . : Friday, May 29, 2009 7:12:54 PM Lease Expires . . . . . . . . . . : Saturday, May 30, 2009 7:12:54 PMEthernet adapter Local Area Connection 4: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Broadcom 570x Gigabit Integrated Controller Physical Address. . . . . . . . . : 00-11-43-47-83-C6Ethernet adapter {37C827CD-C909-4681-89E4-1C29D0C010CF}: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Nortel IPSECSHM Adapter - Packet Scheduler Miniport Physical Address. . . . . . . . . : 44-45-53-54-42-00 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 0.0.0.0 Subnet Mask . . . . . . . . . . . : 0.0.0.0 Default Gateway . . . . . . . . . :Ethernet adapter Network Connect Adapter: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Juniper Network Connect Virtual Adapter Physical Address. . . . . . . . . : 00-FF-68-CD-91-86As you can see above, I've disabled the connection2(Cisco). I enabled the connection3 (Broadcom). Since I uninstalled & re-installed the driver it came up as Connection4 now.I do not know where this "Ethernet adapter {37C827CD-C909-4681-89E4-1C29D0C010CF}:" & "Ethernet adapter Network Connect Adapter:" is coming from. I cant see it under Network Connections window!So bottom line is wifi is the saving grace!