Reliance Jio AirFiber Root Access Guide

[itsyourap]

@sammyXFR Afaik, Jio modified the /etc/opkg/distfeeds.conf which is needed to install and update packages from opkg. I am not sure if the root fs is writable or not, but if it is, you can refer to the OpenWRT opkg docs to restore the file and you can install and update OpenWRT packages.

 

[itsyourap]

I don't have an AirFiber myself to test my theories actually.

 

[sammyXFR]

@itsyourap the road ahead with airfiber looks promising atleast for now hehe

 

[IfranAli]

@itsyourap lol that's what I was wondering too. I used the command with /etc/server.key and never looked at the github command. I was lost after seeing people couldn't get it to decrypt.
Anyways, my SSH is literally showing connection refused. I didn't change the TR-069 settings. Should I change those as well to start dropbear?

 

[itsyourap]

@IfranAli No I don't think so. dropbear should start once after you restore the config and do the "DualWAN" thing

 

[jioalikhan]

@sammyXFR fota.slv stuff is suggested to block to block updates

 

[nitinjs]

I just want to say WOW

 

[nitinjs]

How much RAM and ROM the router has?

 

[sammyXFR]

@nitinjs 500mb ram 250mb rom, For anyone wondering the full throughput of the router over wifi, see below.

Server listening on 5201 (test #4)
-----------------------------------------------------------
Accepted connection from 192.168.31.188, port 50216
[  5] local 192.168.31.1 port 5201 connected to 192.168.31.188 port 50217
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  47.5 MBytes   398 Mbits/sec
[  5]   1.00-2.00   sec  52.1 MBytes   437 Mbits/sec
[  5]   2.00-3.00   sec  54.2 MBytes   455 Mbits/sec
[  5]   3.00-4.00   sec  51.8 MBytes   435 Mbits/sec
[  5]   4.00-5.00   sec  57.3 MBytes   480 Mbits/sec
[  5]   5.00-6.00   sec  56.4 MBytes   473 Mbits/sec
[  5]   6.00-7.00   sec  61.2 MBytes   513 Mbits/sec
[  5]   7.00-8.00   sec  55.9 MBytes   469 Mbits/sec
[  5]   8.00-9.00   sec  55.4 MBytes   465 Mbits/sec
[  5]   9.00-10.00  sec  59.7 MBytes   501 Mbits/sec
[  5]  10.00-10.02  sec  1.25 MBytes   498 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-10.02  sec   553 MBytes   463 Mbits/sec                  receiver

This was done on a wifi 6 capable card, ch-44, spacing 80mhz, full 1200mbps link (acc to windows)

 

[IfranAli]

@itsyourap still didn't work sadly. Looks like something is off from my side.
@sammyXFR 160MHz should give you 4804Mbps at 4x4 and 2402Mbps at 2x2 throughput. HE160 is the code for Radio-5G. See if you can change it.