450BX1 portforwarding

[ssiva20]

hi, 450 bx1,, lap top very near almost 2mtr but next room, it working in the mor ok, after 4hrs of modem in on then problem arrises,:wall:

 

[essbebe]

/ssiva20/ Thanks. Confirmed they have two models 440Bx and 450BX1Last night around 1Am I had frequent disconnections on Airtel. Called on Phone CC.This morning around 10AM technician came and replaced the modem splitter and power unit ! and checked the telephone line .I got Beetel 110BX1 latest ( Only LAN Port) instead of Beetel 220BX1(one) !Has more menu options: will update later in Airtel forum.

 

[ssiva20]

hi, 450bx1 confirm:wall:

 

[rahul771]

hello der,guess this is the only way i can get some solutions for this problem..i have the airtel turbo 1299 plan....got it jus for gaming during the night and downloading...although i must say da 1mbps during the night is very good..im never able to connect to the modern warfare 2 servers for the PS3...it jus keeps sayin "connecting to matchmaking server"....activision and every1 else suggested evry1 to put their routers on dmz and to forward the port number 3074....im a rookie at all dis...so it would e very helpful if any of u guys could help me out on dis..my modem is beetel 450x1..n yeah ive tried portforward.comps....please help....before i throw the game out----------sorry bout the long msg.....n guys, please do help me out......my psn id : rahul771Edit/Delete Message

 

[vu3til]

hey !! @essbebe !! ports are added under VIRTUAL SERVERS. isnt it ?


---------- Post added at 04:14 PM ---------- Previous post was at 04:09 PM ----------

i am using beetel 450 bxi firmware version3.08l.01A2pb022c.d2od and it has no virtual server configuration option or nat option then how to do the required port forwarding ?

 

[essbebe]

@vu3til(a)are you on "DIALER" mode ( enter USERID/PW in computer window ) or (b)On "Always On" PPP/PPpoE ( userId/PW entered in WAn page )? Switch to ( b) Check "Sticky" post Wa3002_g4 qucik reference for screen shots etc.

 

[vu3til]

hey !! @essbebe !! ports are added under VIRTUAL SERVERS. isnt it ?


---------- Post added at 04:26 PM ---------- Previous post was at 04:21 PM ----------

i am using beetel 450 bxi adsl2+router firmware version 3.08l.01.a2pb022c.d2od and it seems that virtual server or nat configuration is not available in this, how port forwarding can be done ?

---------- Post added at 04:38 PM ---------- Previous post was at 04:26 PM ----------

internet is in direct connection mode ip add. subnet mask are in auto selection mode, ppoe mode is checked. Internet connection is working fine but i am having problem with echolink connectivity which uses udp 5198, udp 5199 and tcp 5200. Tcp 5200 gets connected but udp 5198 and 5199 fails to give data.How can these ports may be forwarded to achieve two way communication with the echolink.

 

[essbebe]

@Vu3til
you should be connecting to Internet in "Always On" PPP/PPpoE mode
( userID and PW to be entered in WAn page )

Try 192.168.1.1/main.html
then select Advanced options.
See "sticky" post WA3002-G4 quick reference for more details.
Search PF for sl2_141 in box above.
https://broadband.forum/bsnl-broadband/52637-sl2-141-siemens-quick-reference/#post348055

Echolink has option for proxy server.
What is Diagnosis report by Echolink ?
Try that till you get PF set up done here.
Firewall program/ windows Firewall also to be checked to allow "Echolink"
http://i4.tinypic.com/5y2f8ds.jpg
check in Portforward.com Beetel 220BXI
.

 

[vu3til]

dear essbebe, windows firewall is wrightly configured to permit the ports the echolink firewall test does not pass the udp s and suggests for port forwarding issue, previously i have configuered 220, 110 tc and bxi but 450 bxi which i am having whose firmware version i have mentioned does not seem to be having advance setup, nat,and vertual server etc. thanks for taking interest.

 

[vu3til]

dear essbebe, thank you verymuch for giving me the key to enter to the advance setup of 450 bxi adsl 2+router which i could not found even in its user manual and service manual the key "192.168.1.1/main.html" worked wonderfully and by which i was able to do the portforwarding correctly,and for the first time in last three years i passed the firewall test of echolink ports, thank you very much,=======================