HiI am using UT300R2U modem for BSNL connection at my home, it is working perfectly fine.I want to use Beetel's 110BX1 modem for BSNL connection at my office, so that I don't have to purchase modem from BSNL, as I already have Beetel's 110BX1 with me.I have changed the settings of 110BX1 modem as per the page(which u given link).What happens is whenever I changed the settings and try to connect, it is giving error like remote computer didn't respond in time and trying to reconnect itself.And if I turn off power of the modem, default settings(which is of AIRTEL) is restored.So please help me for using this modem for BSNL connection.I don't want to spend money for purchasing second modem from BSNL.thank you
-
Amazon Deals - ToS - Like us?
BSNL Broadband: Using beetel 110BX1
- Thread starter kingvarun
- Start date
- Replies 23
- Views 33,259
Both Ut300r2u ( new 0 and beetel 220Bx will have
identical menu pages. as the Hardware board is same.
Minor differences in menu pages.
In beetel 220Bx Under Maintenance see
client tr_069 is disabled.
Enter UserId without @ bsnl.in in wan page for
"always on ' connection.
After changes in settings go to
Maintenance and select SAVE Reboot.
wait for two minutes.
identical menu pages. as the Hardware board is same.
Minor differences in menu pages.
In beetel 220Bx Under Maintenance see
client tr_069 is disabled.
Enter UserId without @ bsnl.in in wan page for
"always on ' connection.
After changes in settings go to
Maintenance and select SAVE Reboot.
wait for two minutes.
Last edited by a moderator:
hello...im using mtnl broadband having sterlite modem(sam 300 ax).its working finebut i want to use beetel 110 bx1 modem.i tried resetting beetel,smodem but when i type 192.168.1.1 it shows 401 UnauthorizedAuthorization required. -------------------micro_httpd..so can anyone help me how to use beetel,s modem..plzzthanxx
Post this data .
Start run type cmd Ok
new page
type ipconfig /all
with sam300x .
Use the same default gateway for beetel 110BX1.
settings same as in sam300x
or see this link. 7 and 7a ( without wireless settings )
Start run type cmd Ok
new page
type ipconfig /all
with sam300x .
Use the same default gateway for beetel 110BX1.
settings same as in sam300x
or see this link. 7 and 7a ( without wireless settings )
Last edited by a moderator:
user ID admin
Password password for beetel 110BX1
if still problem reset with power on for 20 to 30 seconds to
have factory settings.
follow this web site as guide. same hardware board/pages.
http://www.calcutta.bsnl.co.in/dataoneinstall/mdm04.html
Password password for beetel 110BX1
if still problem reset with power on for 20 to 30 seconds to
have factory settings.
follow this web site as guide. same hardware board/pages.
http://www.calcutta.bsnl.co.in/dataoneinstall/mdm04.html
For BSNL 0 and 35
see this link:
https://broadband.forum/bsnl-broadband/50052-utstar-wa3002-g4-vade-mecum-quick-reference/#post331246
see 7 or 7a for settings. ignore Wireless settings
or this:
http://wiki.broadbandforum.co/ut-300r2u
see this link:
https://broadband.forum/bsnl-broadband/50052-utstar-wa3002-g4-vade-mecum-quick-reference/#post331246
see 7 or 7a for settings. ignore Wireless settings
or this:
http://wiki.broadbandforum.co/ut-300r2u
@admin
Thanks for the correction noted. Accessed fine.
The above link is for Old model (UT300r2u)
not same as Beetel 110Bx1.
see this link with screen shots etc.
( same board and modem pages )
The little I know about Dataone Broadband Services offered by BSNL
feedback.
Thanks for the correction noted. Accessed fine.
The above link is for Old model (UT300r2u)
not same as Beetel 110Bx1.
see this link with screen shots etc.
( same board and modem pages )
The little I know about Dataone Broadband Services offered by BSNL
feedback.