Bsnl ftth PS4 NAT Type

[stringer.6]

@stringer.6 So is your PS4 connected directly to modem or is it connected to a router?

its connected via LAN cable to the Tenda Router.

 

[Dark_Nate]

@stringer.6 I'm using BSNL FTTH and I can port forward easily because I use bridge mode on the ONT.
Take my advice if you're interested in Open NAT and port forwarding.

Proof of port forwarding on my network
(IP Address doesn't really matter, it changes every hour in my state plus it's next to impossible to establish a connection to it)

 

[stringer.6]

@stringer.6 There will an option called Port triggering under NAT section. Try adding games/apps listed under that.

Where should i look for this option ? I mean which device ? PS4 , Tenda router or the Optilink ONT

 

[Dark_Nate]

@stringer.6 Dude. You will not be able to port forward without enabling bridge mode on the ONT. You are putting yourself in Double NAT for no good reason.

 

[stringer.6]

@stringer.6 I'm using BSNL FTTH and I can port forward easily because I use bridge mode on the ONT.
Take my advice if you're interested in Open NAT and port forwarding.

Proof of port forwarding on my network
(IP Address doesn't really matter, it changes every hour in my state plus it's next to impossible to establish a connection to it)
View attachment 1010

OKs i will give it a try .
but can you help me as to how to go about putting them in bridge mode ??

 

[varkey]

HI ,
I just realised that this is a BSNL section, my ISP is Seven star .. I am sorry i posted here ...

Can you still help me ??



How do i check that ??

Thanks for the response Marhez Riyad

@Dark_Nate He did mention he's not on BSNL.

 

---

[Dark_Nate]

@varkey Ah great.

@stringer.6 Optilink ONT, check-in the interface for bridge mode. Enable it, bind it to LAN1, connect the router to LAN1. I assume your ISP is using DHCP. So you can easily figure that out in the Tenda router config.

 

[stringer.6]

How to identify and resolve double-NAT problems

We’ll show you how to eliminate this conflict between your router and your broadband gateway.

www.pcworld.com

[/QUOTE]

This is a good article to read.

 

[stringer.6]

@Dark_Nate He did mention he's not on BSNL.

Yes , i am based in Mumbai and my ISP is Seven Star.

 

[stringer.6]

@varkey Ah great.

@stringer.6 Optilink ONT, check-in the interface for bridge mode. Enable it, bind it to LAN1, connect the router to LAN1. I assume your ISP is using DHCP. So you can easily figure that out in the Tenda router config.

Giving that a try. Gimme some time. Thanks for the response.