-
Amazon Deals - ToS - Like us?
Changing to Bsnl Connection...
- Thread starter vissu
- Start date
- Replies 12
- Views 3,096
Apoorv Khatreja
Super Loser
My friend has bought the same router recently. I found it very difficult to configure in comparison to other router like DSL 502T and UT 300 R2U.But this is not the general opinion of people on this forum. One problem that I have faced is that port forwarding and other advanced settings get washed away each time the router is rebooted. Any ideas?
Loner Tech
Newbie
You first have to save settings before rebooting only then u won't lose the custom settings.
@vissu
Techtree.com India > News > Hardware > D-Link Intros New ADSL Router
QUOTE
i've been using DSL-502T for da lst 1yr...wid BSNL BB. i absolutely don't have any problem with it...
the GLB-502T is same as DSL-502T...the latter is the autralian release...(u won't find this modem
in the indian website of D-Link). here's ur setup help( this wrked in kolkata-2514 xchnge):
a)192.168.1.1>usr=admin pswd=admin
b) u start at home>select 'WAN' button on da lft.
c)pvc3>virtual circuit enabled>vpi=0>vci=35>wan setting=PPoE/PPoA
usrname=given by ISP>pswd=givn by ISP connection type(or encapsulation)=PPoE LLC MTU=1400>MRU=1492
default route,NAT,firewall=enable all; IP control=dynamic IP service category=UBR
d) now leave WAN,goto DHCP button>select DHCP on
(if u dont want to configure ur lan card/NIC urself) or NO DHCP
(if u want to use the information provided by BSNL...IP add, subnet mask,default gateway..bla bla bla)
if u wish to use only one comp use the info prvded by ur ISP.
e)now goto ADSL Button under ADVANCED. select "modulation type"=g.dmt
f) now goto 'SYSTEM' button under 'TOOLS' save the setting on ur hdisk(plz do)
and then select "save and reboot". thats it ur done!!!
by kaushik from kolkata on 09/01/07 10:04 AM
UNQUOTE
Techtree.com India > News > Hardware > D-Link Intros New ADSL Router
QUOTE
i've been using DSL-502T for da lst 1yr...wid BSNL BB. i absolutely don't have any problem with it...
the GLB-502T is same as DSL-502T...the latter is the autralian release...(u won't find this modem
in the indian website of D-Link). here's ur setup help( this wrked in kolkata-2514 xchnge):
a)192.168.1.1>usr=admin pswd=admin
b) u start at home>select 'WAN' button on da lft.
c)pvc3>virtual circuit enabled>vpi=0>vci=35>wan setting=PPoE/PPoA
usrname=given by ISP>pswd=givn by ISP connection type(or encapsulation)=PPoE LLC MTU=1400>MRU=1492
default route,NAT,firewall=enable all; IP control=dynamic IP service category=UBR
d) now leave WAN,goto DHCP button>select DHCP on
(if u dont want to configure ur lan card/NIC urself) or NO DHCP
(if u want to use the information provided by BSNL...IP add, subnet mask,default gateway..bla bla bla)
if u wish to use only one comp use the info prvded by ur ISP.
e)now goto ADSL Button under ADVANCED. select "modulation type"=g.dmt
f) now goto 'SYSTEM' button under 'TOOLS' save the setting on ur hdisk(plz do)
and then select "save and reboot". thats it ur done!!!
by kaushik from kolkata on 09/01/07 10:04 AM
UNQUOTE
Apoorv Khatreja
Super Loser
You first have to save settings before rebooting only then u won't lose the custom settings.
Ahem, would you like to enlighten me on how to 'save' settings? Do you mean clicking on that blue colored button that has 'save' written on it? If yes, then THANKS!
If no, then forgive my sarcasm, and do tell me how to save the settings.
Ahem, would you like to enlighten me on how to 'save' settings? Do you mean clicking on that blue colored button that has 'save' written on it? If yes, then THANKS!
If no, then forgive my sarcasm, and do tell me how to save the settings.
@Apoorv Khatreja
Have you tried PortForward.com - Free Help Setting up Your Router or Firewall ?
The important point seems to be : To change your Dynamic IP to a static one. ( the program PF does it in the beginning)
Full instructions are available with screen shots. You have to create some rule/s in the end and then save. Hope the program/s Port/s you are interested in, are listed.
Para two : I could easily configure my Beetel 220BX for my Airtel BB for Program ECHOLINK. ( For worldwide Amateur Radio Operator's contact/s known as "HAM RADIO")There was no need for a static IP address.
TCP 5200 UDP 5198 UDP5199.
I have not tried in SmartAX MT882 Dataone connection. I will try shortly for a friend.
Have you tried PortForward.com - Free Help Setting up Your Router or Firewall ?
The important point seems to be : To change your Dynamic IP to a static one. ( the program PF does it in the beginning)
Full instructions are available with screen shots. You have to create some rule/s in the end and then save. Hope the program/s Port/s you are interested in, are listed.
Para two : I could easily configure my Beetel 220BX for my Airtel BB for Program ECHOLINK. ( For worldwide Amateur Radio Operator's contact/s known as "HAM RADIO")There was no need for a static IP address.
TCP 5200 UDP 5198 UDP5199.
I have not tried in SmartAX MT882 Dataone connection. I will try shortly for a friend.
desicooldude
Newbie
so vissu, have you managed to setup ur modem?? if not, then this is the CORRECT METHOD
You can configure this GLB-502T for BSNL broadband by doing the following steps:-
Step 1 : Log into the web configuration of the router by typing the IP address http://192.168.1.1 in the address bar. A prompt for user name and password should appear. Type 'admin' as username and password both and click on login.
Step 2 : Click on setup and then New Connection tab. Configure the modem as per the values given below:
1. Give any name is the 'Name' option.
2. Select Type as PPPoE.
3. username = Which your ISP has provided you.
password = Which your ISP has provided you.
4. VPI = 0
VCI = 35
Rest all would be default settings. Click on Apply and OK.
Step 3 : To save settings properly on the router, click on 'Tools' and 'System Commands' and then click on 'Save All'. Once settings are saved we need to reboot router so click on 'Restart' tab just below to 'Save All' tab and let the router reboot.
You can configure this GLB-502T for BSNL broadband by doing the following steps:-
Step 1 : Log into the web configuration of the router by typing the IP address http://192.168.1.1 in the address bar. A prompt for user name and password should appear. Type 'admin' as username and password both and click on login.
Step 2 : Click on setup and then New Connection tab. Configure the modem as per the values given below:
1. Give any name is the 'Name' option.
2. Select Type as PPPoE.
3. username = Which your ISP has provided you.
password = Which your ISP has provided you.
4. VPI = 0
VCI = 35
Rest all would be default settings. Click on Apply and OK.
Step 3 : To save settings properly on the router, click on 'Tools' and 'System Commands' and then click on 'Save All'. Once settings are saved we need to reboot router so click on 'Restart' tab just below to 'Save All' tab and let the router reboot.