How to Connect TP-XZ000-G7 to Airtel Xstream Broadband?

deepakdcg · Jul 19, 2024

just for testing purpose I purchased a TP-XZ000-G7 to check bridged mode compatibility with my Airtel FiberNet...

all I did was to enter the Airtel provided Huawei ONT 16-digit serial number in G7 and it worked perfectly.

MrGordon · Jul 19, 2024

@akshay71 That makes sense. Now that I think about it, I did notice an odd issue with the Huawei as well. When I used the same ONT with the Kerala LCO (BSNL, KV etc), I just needed to create a bridge profile and define the VLAN, I never bound it to a port. However on Airtel, that never worked. I could connect only if I bind the bridge profile with the VLAN to a port and establish PPPoE directly ie VLAN management handled at the ONT. Could be because of this translation issue that you mentioned.

I’ll check if an OMCI client is available on the Huawei and see if I can extract this info.

Sanemi · Jul 19, 2024

@MrGordon Will the TP-Link XZ000-G7 works with the Asianet Broadband (Direct) by cloning the GPON S/N ? I tried on the Netlink ont it has an option to clone the GPON S/N and I filled the vlan but it didn’t worked

MrGordon · Jul 19, 2024

@akshay71 So I got these from the Huawei ONT, not sure how to interpret this. Any ideas?

Code:

WAP(Dopra Linux) # omcicmd mib show 171 65535
omcicmd mib show 171 65535

  -------------------------------------------------------
  Me(171)(Extend Vlan Tag) has 1 instances, instance size is 40
  -------------------------------------------------------
  Instance ID = 0x0009, Instance Content:
  0a430000 00008100 e8699d01 01060000 00249249 4924926d b6db9249 24b6db6d
  -------------------------------------------------------
WAP(Dopra Linux) # omcicmd mib show 84 65535
omcicmd mib show 84 65535

  -------------------------------------------------------
  Me(84)(VLAN Tagging Fi) has 2 instances, instance size is 28
  -------------------------------------------------------
  Instance ID = 0x0903, Instance Content:
  010c0000 00000000 00000000 00000000 00000000 00000000 1001
  Instance ID = 0x0904, Instance Content:
  9a020000 00000000 00000000 00000000 00000000 00000000 1001
  -------------------------------------------------------

MrGordon · Jul 19, 2024

@akshay71 Does that mean the real VLANs are

Code:

Hex - Decimal
0x0903 - 2307
0x0904 - 2308

MrGordon · Jul 19, 2024

No luck with 2307 or 2308. Same status as before.

No XPON downstream stats are shown, it remains 0.

anmolbhard004 · Jul 19, 2024

@akshay71 I have both VSOL and photon onu would be happy to help you if you want to buy from me.
feature wise, fw everything is same , just that vsol ones are a bit costly than photon ones

@MrGordon you need to scan vlan And AFAIK you had hsgq sfp right?

akshay71 · Jul 19, 2024

@MrGordon

This should be the output of that command someone posted on github. Their actual VLAN was 4051 for Internet and 4052 for Voice. But had to use 1502 for internet and 1493 for voice.

Why are you adding 65536 after the command?

Code:

AP#omcicli mib get 171
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
ExtVlanTagOperCfgData
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
=================================
EntityId: 0x101
AssociationType: 2
ReceivedFrameVlanTagOperTableMaxSize: 0
InputTPID: 0x8100
OutputTPID: 0x8100
DsMode: 0
ReceivedFrameVlanTaggingOperTable
INDEX 0
Filter Outer   : PRI 8,VID 4051, TPID 5
Filter Inner   : PRI 8,VID 4096, TPID 0, EthType 0x00
Treatment Outer   : PRI 15,VID 0, TPID 0, RemoveTags 1
Treatment Inner   : PRI 9,VID 1502, TPID 3
INDEX 1
Filter Outer   : PRI 15,VID 4096, TPID 0
Filter Inner   : PRI 8,VID 4051, TPID 5, EthType 0x00
Treatment Outer   : PRI 15,VID 0, TPID 0, RemoveTags 1
Treatment Inner   : PRI 8,VID 1502, TPID 2
INDEX 2
Filter Outer   : PRI 8,VID 0, TPID 5
Filter Inner   : PRI 8,VID 4096, TPID 0, EthType 0x00
Treatment Outer   : PRI 15,VID 0, TPID 0, RemoveTags 1
Treatment Inner   : PRI 9,VID 1502, TPID 3
INDEX 3
Filter Outer   : PRI 15,VID 4096, TPID 0
Filter Inner   : PRI 8,VID 0, TPID 5, EthType 0x00
Treatment Outer   : PRI 15,VID 0, TPID 0, RemoveTags 1
Treatment Inner   : PRI 8,VID 1502, TPID 2
INDEX 4
Filter Outer   : PRI 15,VID 4096, TPID 0
Filter Inner   : PRI 15,VID 4051, TPID 5, EthType 0x00
Treatment Outer   : PRI 15,VID 0, TPID 0, RemoveTags 0
Treatment Inner   : PRI 0,VID 1502, TPID 2
INDEX 5
Filter Outer   : PRI 14,VID 4096, TPID 5
Filter Inner   : PRI 14,VID 4096, TPID 0, EthType 0x00
Treatment Outer   : PRI 15,VID 0, TPID 0, RemoveTags 3
Treatment Inner   : PRI 15,VID 4096, TPID 3
INDEX 6
Filter Outer   : PRI 15,VID 4096, TPID 0
Filter Inner   : PRI 14,VID 4096, TPID 5, EthType 0x00
Treatment Outer   : PRI 15,VID 0, TPID 0, RemoveTags 3
Treatment Inner   : PRI 15,VID 4096, TPID 2
AssociatedMePoint: 0x101


EntityId: 0x601
AssociationType: 10
ReceivedFrameVlanTagOperTableMaxSize: 0
InputTPID: 0x8100
OutputTPID: 0x8100
DsMode: 0
ReceivedFrameVlanTaggingOperTable
INDEX 0
Filter Outer   : PRI 15,VID 4096, TPID 0
Filter Inner   : PRI 8,VID 4052, TPID 5, EthType 0x00
Treatment Outer   : PRI 15,VID 0, TPID 0, RemoveTags 1
Treatment Inner   : PRI 8,VID 1943, TPID 2
INDEX 1
Filter Outer   : PRI 15,VID 4096, TPID 0
Filter Inner   : PRI 15,VID 0, TPID 5, EthType 0x00
Treatment Outer   : PRI 15,VID 0, TPID 0, RemoveTags 3
Treatment Inner   : PRI 15,VID 0, TPID 2
INDEX 2
Filter Outer   : PRI 14,VID 4096, TPID 5
Filter Inner   : PRI 14,VID 4096, TPID 0, EthType 0x00
Treatment Outer   : PRI 15,VID 0, TPID 0, RemoveTags 3
Treatment Inner   : PRI 15,VID 4096, TPID 3
INDEX 3
Filter Outer   : PRI 15,VID 4096, TPID 0
Filter Inner   : PRI 14,VID 4096, TPID 5, EthType 0x00
Treatment Outer   : PRI 15,VID 0, TPID 0, RemoveTags 3
Treatment Inner   : PRI 15,VID 4096, TPID 2
AssociatedMePoint: 0x601

MrGordon · Jul 19, 2024

@akshay71 I think that’s the output from a different device. On the Huawei that I have the output doesn’t show the same way. So was a bit confused on how to interpret it.

The 65536 is as per the syntax shown in the CLI, it said to use 65536 if you want to see all the data.

Code:

[Usage]:omcicmd mib show {me-id} {inst-id}
me-id: 65535 show all me and inst info
inst-id: 65535 show all inst info

In my case, it looks like the OLT is of Tajas Networks make.

Code:

WAP(Dopra Linux) # omcicmd mib show 131 65535
omcicmd mib show 131 65535

  -------------------------------------------------------
  Me(131)(OLT-G) has 1 instances, instance size is 54
  -------------------------------------------------------
  Instance ID = 0x0000, Instance Content:
  544a4e57 4f4c5400 00000000 312e3000 00000000 4f675365 312e3000 00000000
  -------------------------------------------------------

The first part in ASCII is TJNWOLT, and TJNW is the vendor id of Tejas Networks.

deepakdcg · Jul 19, 2024

hey guys - 2 days back I had raised request for Static IP deactivation... I am yet to receive confirmation from Airtel

but meanwhile I removed static IP from ONT and configured PPPoE, my WAN IP on Asus bridge router is different (122.179.31.XX) and my static IP was (122.166.190.XX)...

now when I do a tracert, I get below result
Tracing route to dns.google [8.8.8.8]
over a maximum of 30 hops:

1 1 ms 1 ms 1 ms RT-AX1800HP [192.168.1.1]
2 6 ms 5 ms 4 ms abts-kk-dynamic-001.4.179.122.airtelbroadband.in [122.179.4.1]

does this mean I am now not on static IP ? I am little confused

How to Connect TP-XZ000-G7 to Airtel Xstream Broadband?

Resonating