How to use more than one BSNL BB on one modem/router ?

[anant]

I have three BSNL BB connections at various locations in my office / home premises of different denominations (plans). The splitters are placed at a central location and the DSL extended to different rooms. All the DSL extensions are routed to my room also. I swap the DSL connections according to the needs of speed and volume, but need to edit the WAN page every time. Is there any way to configure the modem for all the three plans so I do not have to visit the router configuration whenever I change the connection? I am using WA3002G4 in PPPoE.

 

[marcopoloxp]

I don't know your requirement, but I think you can do this more easily if you set your modem in bridge modem.What you will need to do is just pulling out the line chord (RJ 11) from one wall socket and plug into another wall socket according to which connection you need at that time.Only 1 splitter is needed and you have to create 3 wan miniport dialer for 3 connection with different user id and password.

 

[essbebe]

Yes.with "Bridged" Dialer mode is possible, as explained above. Wa 3002-g4
How many computers are used ? presume you are using rj45 cables

Para two;
ID abcd @ bsnl.in PW xxxx modem wa 3002-g4 Rj45 line 1 Also WIFI ~~~~~~
[qID 123abcd @ bsnl.in PW xxxxx say modem ut300r2u line 2

ID 987dcba @ bsnl.in Pw xxxxx say modem ut300r2U line 3
If you are not using WIFI better to buy another
two adsl modems ( Rs 1000/= each from BSNL )
Three rj45 cables from different modems.
Para three :
If distance involved is less ( say a radius of 50 feet ) using
three wifi routers with different
Newtwork Id and security code possible. all systems must have Wlan card/s

Is there any way to configure the (*single)modem for all the three plans

NO
For different ISPs possible.
Connect RJ11 cable to concerned ISP's Phone line.
vpi/vci 0_35 BSNL
vpi/vci 1_32 Airtel
VPI/VCI ?? ?? for Reliance etc.
possible. Use DNS 8.8.8.8 ( Google) and 208.67.220.220 ( OPENdns)

 

[anant]

Thanks for your replies...

We (I) have more connections than users..:rofl:

I have two UT300R2u and one WA3002G4 modems. One D-Link wifi router is connected to one of the typeI modems. All the modems are in PPPoE mode. Both the typeI modems are in different rooms.

For different ISPs possible.
Connect RJ11 cable to concerned ISP's Phone line.
vpi/vci 0_35 BSNL
vpi/vci 1_32 Airtel
VPI/VCI ?? ?? for Reliance etc.
possible. Use DNS 8.8.8.8 ( Google) and 208.67.220.220 ( OPENdns)

I think this settles the problem...