iPhone + UTStarcom = wifi Connection???How???

[Nidhi Aneja]

Ok...i know there are many how-tos on the wifi problem related to iPhone....but they seem to just go over my head...can anyone please help me here...

Expanding the title....

I need to connect my iphone to wifi.
I recently upgraded to 3gs...and i have no idea ..AGAIN..on hw to connect it to my braodband connection....


Ummm....details..

Well wen i turn on the wifi status in iphone...i get the name of the connection im using.."UTStarcom" .
So i connect && enter passwrod n stuff .
Then further under DHCP.

IP ADDRESS- 192.168.1.3
SUBNET MAST- 255.255.255.0
ROUTER- 192.168.1.1
DNS- 192.168.1.1
SEARCH DOMAINS- -
CLIENT ID- -

and the HTTP Proxy thing is set to "auto"


I have bsnl broadband 750...thing plan...and im using UTStarcom router thing...wa3002g4......

I have HP laptop....just FYI...with vista
Details:
Windows IP Configuration


PPP adapter Broadband Connection:

Connection-specific DNS Suffix . :
IPv4 Address. . . . . . . . . . . : 59.94.243.134
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 0.0.0.0

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::c48c:b264:6866:f2a2%11
IPv4 Address. . . . . . . . . . . : 192.168.1.4
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1

AND yeah i checked in the http://192.168.1.1/ thing and the dhcp is enabled .


So when i connect to this network on iphone...safari dosent' budge...as in im not able to connect...
can anyone help???


P.S.-I was just wondering....like in laptop..you have to connect to wifi...then further where you have to enter username and password...don't we need to do the same in iphone???


HELP.

 

[essbebe]

Instead of "Dialer" mode change over to
"ALways On" PPP/PPPoE ( UserId and PW entered in WAn pahe of modem 0
Deselected "Bridged"
Enable DHCp.
Also UPnP if seen.
Save reboot wait for 2 minutes.
try now feedback.

Para two : See "sticky" post WA3002_g4 quick reference in this forum.
https://broadband.forum/bsnl-broadband/50052-bsnl-broadband-utstar-wa3002-g4/

 

[Nidhi Aneja]

"Instead of "Dialer" mode change over to
"ALways On" PPP/PPPoE ( UserId and PW entered in WAn pahe of modem 0
Deselected "Bridged"
Enable DHCp.
Also UPnP if seen."

Uhhh...how em i supposse to do this???

"Para two : See "sticky" post WA3002_g4 quick reference in this forum.
BSNL Broadband: UTSTAR WA3002-G4 vade mecum ( quick reference )"
Everything is set according to the Guide...but im still not able to connet


AM I SUPPOS TO BRIDGE SUM CONNECTIONS OR NOT???N I NEED TO...WHICH ONE??
Right now...i have to manually connect to these two in red box..
http://img203.imageshack.us/img203/7330/63818490.jpg

 

[lake]

use the bridge mode for ur wired broadband and create a profile ,u can connect it to ur iPhone,i have tried it using my bsnl and itouch 2g

 

[hosini786]

I had the same problem ..solution at IPHONE WIFI PROBLEMS
It worked
U cannot use pppoe on I phone so I had to do this..
ALL THE BEST