JioFiber Root Access [How to] [with Proof]

[vansh04]

Hey @tr1k0N4, using the XZ000-G3+Router, we need to set up the GPON serial number and login id and to connect to the internet we need PPPoE credentials, so how do you extract it from the jio router?

 

[tr1k0N4]

Hey pal!
JioFiber uses DHCP as the Internet connection mode so don't worry about any PPPoE creds.

 

[vansh04]

@tr1k0N4. Ok then what about GPON SN. Is it SCOW followed by my router mac address?

​

 

[tr1k0N4]

SCOM

 

[vansh04]

Ok, thank you and what about GPON login id?

 

[tr1k0N4]

GPON Login ID? Please be a little more specific

 

[vansh04]

Nothing pal!
I was myself confused that time.

 

[naitik1203]

As of now the i managed to get config file but the keyguesser.py is not working for RSxxxxxxxxxxxxx_JCOW404.enc file it just runs and all keys are failed even after using correct statements
Firmware version 3.10.2
This Jio router is just trash
on this firmware i can enable bridge mode but not sure if it works i have a Huawei HG8145V GPON ONT (earlier used for airtel now all config of airtel are removed) i will try it using bridge mode and lan cable

 

[tr1k0N4]

Bridge mode on Jio HGW doesn't work, brdr! You can get a TP-Link XX530v instead.

 

[naitik1203]

Anyone facing issues with telnet access as when i try to immediately use telnet after uploading config and successfully changing password it shows error that connection not open on port 23