NOKIA G-2425G-A ONT is COOKED

[TJ10]

@igloo How's the performance of the Dasan compared to the Nokia? Can the basic settings be changed?

 

[igloo]

@TJ10 wifi coverage is weak in comparison to Nokia , I am using along Deco M4 in access point mode. You can easily change most of basic settings.
Don't want to deal with Airtel support for bridge mode.

 

[TJ10]

Channel settings aren't locked right?

If it isn't, I'll push Airtel's CC to replace the Nokia with a Dasan

 

[ka2107]

The Airtel technician replaced the Nokia G-2425G-A with GX Titanium-2122A. However the WAN settings are locked down in the 2122A and only IPv4 (CGNAT address via WAN DHCP) is enabled, due to which I am not getting IPv6 at all. How to enable IPv6 on the 2122A?

 

[igloo]

@TJ10 yes you can change channel settings

 

[UncleSamGoaWale]

@all - I currently have AOT-4221SR but I can have Nokia/ZTE/ZLT ONT - full story in the link below, questions is for max coverage shall i go for this Nokia router -NOKIA G-2425G-A - even with all this issues mentioned here - in future I will be buying my own router so I'm hoping bridging is still allowed on this model? I will have the enabled right now while my complaint is fresh with the higher ups, any downsides? AOT-4221SR has terrible coverage , any other models I can ask for? please advise urgently so I can reply to them, thanks in advance for all the help provided on this forum cheers

Best ONT (Coverage/Latency/least lockdown) provided by Airtel atm and can they see remotely if the DTH is being used - hoping they can! Bhopal

paging @MrGordon @DakshK579 and others, I understand it's a long post and the title could have been better like got Airtel by the balls. But if you could please answer the questions so I can give them hell for their shity shity CS now that I have higher ups looking into it thanks as always boys

broadband.forum

 

[UncleSamGoaWale]

@DakshK579 - so we can't even login to the admin page anymore of this router? i have AOT-4221SR so wondering which I should be replaced with for better coverage while still able to manage it using web gui. more info in my latest post thanks in advance

edit - can't disable Tr069 on AOT-4221SR as is

 

[DakshK579]

@UncleSamGoaWale sorry for late response brother you can access admin panel easily just make sure that while router is getting setup like they connect it to fiber line & do coverage test, in that moment backup router & do the unlock procedure as soon as possible.

After update unlocking will not be there of router so unlock it & live a peaceful life.

 

[shann9999]

@shann9999 Really sad for you bro well but now you are done totally so if needed you would need to reset the ONT only now even Telnet would stop now & after reset if you do reset please have us know that your ONT changes from ALCL to BRTI too.

@DakshK579 from login page view its still points to ALCL. I haven't reset the device after the update push. I have tried all the password combinations but no luck. Do you have any in mind?

var operatorid = "ALCL";

if(operatorid == "TLEG" || operatorid == "ACUD"){
    if(window.location.href.indexOf('login.cgi') !== -1) {
        window.location.href = window.location.protocol+'//'+window.location.host;
    }
}

I even tried soft reset of username and password by holding reset button for 5 seconds still no luck. Any userass recommendations ?

Pass i have tried:

AdminGPON:ALC#FGU
admin:admin
admin:password
ONTUSER:SUGAR2A041
adminadmin:ALC#FGU

 

[shann9999]

Finally reset the router, it was still pointing to ALCL. but could not able to login web portal with AdminGPON:ALC#FGU


Tried to access via serial console, and uboot is locked.