Problems configuring Linksys Wireless router WRT54G with Tata Indicom broadband

[gprasad]

Hi, I am unable to configure my Linksys wireless router with the Tata Indicom broadband modem. I have the 256 Infinity plan and as far as I know it is a DSL connection. The internet works fine when I plug the tata indicom broadband connection straight to my laptop, but the minute I try and use wireless it cant connect. I have been allocated a static IP by Tata which is configured on their modem but my laptop continues to have DHCP. Please advise

 

[raamm]

Use the above link


Linksys.com - Support/Technical Support/Choose a Product/Routers and Access Points/Wireless Routers/WRT54G


Try out

You need to configure router wireless setting by entering your browser 192.168.1.1

leave user name blank enter password as : admin

just enable wireless option under wireless settings



user guide
http://www.linksys.com/servlet/Satellite?blobcol=urldata&blobheadername1=Content-Type&blobheadername2=Content-Disposition&blobheadervalue1=application%2Fpdf&blobheadervalue2=inline%3B+filename%3DWRT54G_UG_WEB_20070529.pdf&blobkey=id&blobtable=MungoBlobs&blobwhere=1130877072517&ssbinary=true&lid=8635800349B05


I use Netgear so iam not that much familiar any way try these it will work

regards
ram

 

[gprasad]

Hi I dont have a problem accessing the routers homepage to setup the info, the problem is what info do i use? Tata has given me a static IP, should i be using that or should i leave the setting as DHCP in the Linksys router to be able to use the wireless. When I use the wireless my connection state shows local access. laptop to linksys connection is fine, linksys to tata modem is not working hence no internet.

 

[vishalrao]

i have same Linksys but bsnl dynamic ip with ethernet adsl modem. i had to switch the modem to bridge mode and do pppoe dialling from linksys. you might need to disable dhcp in the modem by first connecting to you pc and allow it to provide the external static ip to local connection. then connect linksys and enter static ip there as well.what model modem do you have for tata that info might help

 

[kitty7]

Hi - anyone managed to do this? i too have same issue

 

[essbebe]

@kitty7.
Welcome to BroadbandForum.
Have you tried suggestion by Vishalrao ?
seems problem with IP allocation. Check the DSL status in your modem.

Manual from here
Linksys WRT54GC Compact Wireless-G Broadband Router owners manual download

 

---

[kitty7]

Hi. I do not know how to convert modem to bridge...tried going the ppoe route without this step, again no luck. im completely confused...i had configured hathway in the past which also was on static ip...that worked with zero issues Do u think i should reset my dsl router and configure the static only on my Linksys modem???

 

[essbebe]

@kitty7.
What is the modem you are using ?
see this web site and select your modem.
BROADBAND MAIN MENU

1. set your modem to "AlwaysOn" PPPoEmode.Get connected to Internet.
2. Now change the setting to Bridge mode. (User ID/password page won't appear)
3. Use the Dialer to enter your ID and password to connect to Internet.
4. If you are successful, then enable DHCP in the modem.
5. Program Linksys in automatic mode.

go to tinypics.com. In search type DATAONE. I have posted number of screen shots there for reference.

 

[kitty7]

Hi my modem is given by tata indicom . ADSL one, by Xavi. X7721r+

It is vieable on Xavi Tripleplay Express in product search. It is under the product line "obsolete products"

Thanks i shall look at ur suggestions.

 

[streamsurfer]

i have no probs with my WRT54G , but i don't have a static IP (prepaid plan). try the setting of static ip option on WRT54G as the post above mentions.