Reliance Jio AirFiber Root Access Guide

[kovacs1122]

@error4oo4

in /etc/config/network edit wan and wan6 to

config interface 'wan'
    option device 'eth1'
    option defaultroute '1'
    option peerdns '0'
    list dns '1.1.1.1'
    list dns '1.0.0.1'
    option metric '2048'
    option ip6prefix '64:ff9b::/96'
    option proto '464xlat'
    
config interface 'wan6'
    option proto 'dhcpv6'
    option device 'eth1'
    option defaultroute '1'
    option reqaddress 'try'
    option reqprefix 'auto'
    option peerdns '1'
    list dns '2606:4700:4700::1111'
    list dns '2606:4700:4700::1001'
    option dhcpv6 '0'

Also comment out plume in /etc/config/plume

# config plume
#     option redirector_addr 'ssl:redirector-prod.rho.jiohs.net:443'

 

[kovacs1122]

Got luci to work. Install openwrt luci packages from here

 

[kovacs1122]

Weird, my router got updated to 2.0.9 from 2.0.6 even though OTA's were blocked on hosts file.

 

[SandipB]

@kovacs1122 is luci able to control everything?
Did it added any new control option? Like enabled wifi6
Did you had remove the default jio ui?
Did update caused any issue with root access?
Are you able to install packages via luci or ssh?

 

[Palwinder Gill]

@kovacs1122 So, you just installed luci package, and it worked?

 

[Deleted member 88173]

i also managed to instal luci.Did you able to instal kmod-usb-net-rndis ? i cant find the package

 

[SandipB]

@error4oo4 what's the steps to install luci?
Do you removed the jio webui?

 

[SandipB]

@error4oo4 if you have luci you can download kmod-usb-net-rndis package and manually upload it and install it.

 

[lazarus]

@kovacs1122, i did manage to uninstall existing luci and update it to the latest one, However, never got the UI working.
Are you able to get rid of jio ui?

 

[kovacs1122]

@Palwinder Gill @lazarus @SandipB

First download and install WinSCP and connect to the router using SCP protocol.
Download the luci_base.ipk from this repo and transfer it to the router, preferably on /tmp/.
Install luci_base.ipk using SSH

opkg install /tmp/luci_base.ipk --force-downgrade

.
Now do,

/etc/init.d/uhttpd start
/etc/init.d/uhttpd enable

Luci should be running at 192.168.31.1 with missing theme error, use the same methods to install a theme of your choice from the repo and it should be working.

And yes a lot of the features are working, Including separating the 2.4ghz and 5ghz but I would advise not to modify anything on 5ghz as it caused my router to brick and I had to reset it (which makes the router goto factory default and even removes root access, and in my case even updated to the latest fw).