Tata Sky Broadband: Static IPV6 - Unable to Configure

[morecrap]

@rizexor That would be correct. IPv4 is NAT-ed. The only public IP you get is IPv6.

 

[Soumil]

@rizexor Yeap, this is going to become the norm now, that IPv4 access will be behind CG-NAT, while the IPv6 addresses will be publicly routable for remote access.

 

[ravenous24]

@rizexor That would be correct. IPv4 is NAT-ed. The only public IP you get is IPv6.

I think even IPv6 is NAT-ed as I am still unable to access my plex server after shifting to static IPv6.

 

[nerdseeder]

I also applied for static IPv6 and as per customer care it is activated. But I am not able to get IPv6, anyone configured IPv6 in Pfsense?

 

[ravenous24]

@nerdseeder You have to get the back end engineer to login to your modem and do some changes. I applied 3 times to get it done and sent them screenshots that it wasn't activated yet.

 

[nerdseeder]

@ravenous24 Do you know how they are configuring IPv6?
I tried every option in below snapshot. Nothing worked for me till now.

 

[ravenous24]

@nerdseeder Which modem did Tata Sky give you?

 

[nerdseeder]

@ravenous24 I am using Dumb bridge ONT Nokia G-010G-Q as seems like G-140W-F does not support bridge mode. I am using Pfsense.

Can you please share screenshot from your IPv6 configuration from ONT. You can hide IPs and other personal details.

 

[ravenous24]

@nerdseeder Here you go but I don't think these will help.

 

[ravenous24]

@ravenous24 I am using Dumb bridge ONT Nokia G-010G-Q as seems like G-140W-F does not support bridge mode. I am using Pfsense.

Can you please share screenshot from your IPv6 configuration from ONT. You can hide IPs and other personal details.

Were you able to resolve this?