TP-Link Archer A6v3 OpenWRT Issues

[HC1337]

Give it a try for IPv6, but I don't know how reliable it might be. Also what was the problem?

 

[HC1337]

Do report here with the results aswell, would be helpful insight.

 

[nishantt6969]

We had to create two policies, one for primary connection and other one for secondary connection. In primary and secondary both, we had to use last resort as default(use main routing table). This fixed the issue. Router is working like a charm now with dualwan failover.

 

[Lolita_Magnum]

Final testing of MWAN3, with 3 load-balancing connections on TP-Link Archer A6v3. At peak, CPU usage is quite minimal with an avg 3-6%.
Using firmware '22.03.0-rc4'.

Note-Port Forwarding does not seem to work. Getting requests timed out.
Wifi set, as mentioned by @Aashish.007 on post 2.
All operations are normal, will be testing now in long term.

 

[HC1337]

same ONT 3 connections?

 

[Lolita_Magnum]

Same ONT 3 connection, same PPPOE user account.

 

[Aashish.007]

After setting country code to India (IN) it is possible to use channel 149, much less congestion and max power changes to 23 from 20dbm earlier.

 

[havoc]

@Lolita_Magnum can I use the same firmware for my C6 V3? (I guess A6 & C6 are same except for the name)

 

[Aashish.007]

@havoc

https://asu.aparcar.org/store/f9614b200e2a19de61ca54032b8c77d4/openwrt-bd3d0ff0beea-ramips-mt7621-tplink_archer-c6-v3-squashfs-factory.bin

 

[Lolita_Magnum]

There are only snapshots of Archer c6 V3, so use it at your own risk.
Official url.

https://downloads.openwrt.org/snapshots/targets/ramips/mt7621/openwrt-ramips-mt7621-tplink_archer-c6-v3-squashfs-factory.bin