whitestar_999
Regulars
reset button for sl2_141 is located below the modem.it is situated inside one of the hole which looks like ventilation holes.
-
Amazon Deals - ToS - Like us?
using 2 connections on pc
- Thread starter partyanimal1989
- Start date
- Replies 21
- Views 4,403
whitestar_999
Regulars
one of my friend told me about this & i have to ask him for screenshot.as for how difficult it is my friend has this modem for 5 months & he couldn't find it.he found it only after i gave him the location which i got from another user who told me that a bsnl employee told him about location of reset button.even now i don't think more than 5%(maybe even less) users know about location of reset button on sl2_141.
partyanimal1989
Newbie
dudes its easy to locate yaar..... just turn ur modem upside down.... ull notice dat all d ventillation holes are square in shape.............the one which is round in shape is the one.......................onother clue its near the lower left rubber stopper.....................just cooncentrate and ull find it yaar
it can be easily done using wingate, i done it around one year ago merging hathway512+airtel256, getting speed of 700+.
search the forum, if didn't get PM me.
wingate:- WinGate
here is the tread ,
https://broadband.forum/airtel-broadband/9869-network-bridge/
search the forum, if didn't get PM me.
wingate:- WinGate
here is the tread ,
https://broadband.forum/airtel-broadband/9869-network-bridge/
partyanimal1989
Newbie
hey bro @ netanti have downloaded d software but cannot install it properly may be bcoz i m not a computerguy lke all of u here so pls can u give me a step by step approach on doin this thanks br0
can u give me a step by step approach ....
Hope this link helps you (with screen shorts ):-
Using two or more Internet connections
else (Copy paste from my old thread):-
It is very easily done. All you have to do is setup a NAT (Network Address Translation) network with a software routing program (Wingate).
Im a lazy bastard so i'm only going to type up a vague tutorial on how to do this.
1) Have both (or more) of your modems connected to different NIC cards (or just buy a USB hub and connect you cable modems that way).
2) Make sure both modems are fuctioning separately, AND THAT BOTH IP ADDRESSES THAT THE MODEMS HAVE OBTAINED ARE ON DIFFERENT GATEWAYS.
3) download wingate Qbik: - WinGate, WinGate VPN, NetPatrol
-----------------------------------
4) Install the shit (MAKE SURE ALL THE OPTIONS ARE INSTALLED JUST AS BELOW).
(Installation type, Configure as ect.. as a Server) PRESS CONTINUE
PRESS NEXT 3 TIMES AND THEN UNCHECK USE WINGATE MAIL SERVER, THEN PRESS NEXT
CLICK NEXT 3 TIMES THEN CLICK \"ACTIVATE\" TO ACTIVATE THE SOFTWARE (DONOT PICK THE “WINGATE VPN” because then you wont be able to do shit). AFTER YOUR DONE ACTIVATING PRESS NEXT, THEN CLICK BEGIN.
CLICK FINISH AFTER IT FINISHES INSTALLING AND DO NOT RESTART (THERE’S NO NEED TO)
5) Goto Start, Programs, Wingate and run “Wingate VPN Monitor”
6) Double click the icon with the two little red monitors next to your computer clock on the taskbar.
7) It’ll ask you if you want to run the Wingate Engine, CLICK OK.
8) A “Online Options” window will popup just click OK. It’ll tell you that you haven’t specified a password, just click “don’t ask me again” then click ok.
9) Start the damn Wingate engine if it asks you if you want to by clicking OK.
10) It’ll say some shit about GateKeeper needing a password, click OK and ENTER A PASSWORD YOU CAN REMEMBER then click OK.
11)Now click on “Services” Tab on the Bottom Left.
12) On the upper left right under the “Go Offline” Icon theres gonna be 4 things. Click on each one and press delete on you keyboard to delete the shits.
13) Right click on the empty white space where you deleted the services and press “New Service”, then “WWW Proxy Service”.
14) A window will popup….. Where it says “Service Port 80” (Right in front of you face) change that number to, well for this tutorial we will put it to “ 1111 “ (One Thousand, One Hundred, Eleven).
15) now to the left of that window click “Bindings”, Under binding policy UNCHECK “Bind to any IP ADDRESS…. Ect..”
16) now click “Gateways” to the left of the window.
17) on Connection scheme change it to “use blah blah blah on rotation” Now click on add.
18) you should see both your NIC card names, click the little plus sign bullshit to expand the tree and expand both “Gateways” and “Source IP addres.” And click on “Any Gateway” and “Any IP ADDRESS”. Click ok then click ADD AGAIN!!!! DO THE SAME SHIT WITH YOUR SECOND NIC CARD (INTERNET CONNECTION WHATEVER).
19)Now click APPLY, then OK, THEN YES.
20) your NAT PROXY should be working now…. So we are now going to test if you did all this shit right and both connections are Routed through the software proxy…
21) open up Internet Explorer, click on Tools, then Internet Options, then click connections, then click LAN SETTINGS. PUT A CHECK MARK ON “USE A PROXY SERVER FOR YOUR LAN ect….” And in Address TYPE IN 127.0.0.1 and in PORT TYPE IN 1111. CLICK OK THEN OK AGAIN.
22) Now goto IP Info - Find your IP address and check your IP ADDRESS. Keep Pressing REFRESH AND IF YOUR ip address DOES CHANGE (or Rotates) with your other IP ADDRESS YOU HAVE SETUP THE PROXY PERFECTLY.
Hope this link helps you (with screen shorts ):-
Using two or more Internet connections
else (Copy paste from my old thread):-
It is very easily done. All you have to do is setup a NAT (Network Address Translation) network with a software routing program (Wingate).
Im a lazy bastard so i'm only going to type up a vague tutorial on how to do this.
1) Have both (or more) of your modems connected to different NIC cards (or just buy a USB hub and connect you cable modems that way).
2) Make sure both modems are fuctioning separately, AND THAT BOTH IP ADDRESSES THAT THE MODEMS HAVE OBTAINED ARE ON DIFFERENT GATEWAYS.
3) download wingate Qbik: - WinGate, WinGate VPN, NetPatrol
-----------------------------------
4) Install the shit (MAKE SURE ALL THE OPTIONS ARE INSTALLED JUST AS BELOW).
(Installation type, Configure as ect.. as a Server) PRESS CONTINUE
PRESS NEXT 3 TIMES AND THEN UNCHECK USE WINGATE MAIL SERVER, THEN PRESS NEXT
CLICK NEXT 3 TIMES THEN CLICK \"ACTIVATE\" TO ACTIVATE THE SOFTWARE (DONOT PICK THE “WINGATE VPN” because then you wont be able to do shit). AFTER YOUR DONE ACTIVATING PRESS NEXT, THEN CLICK BEGIN.
CLICK FINISH AFTER IT FINISHES INSTALLING AND DO NOT RESTART (THERE’S NO NEED TO)
5) Goto Start, Programs, Wingate and run “Wingate VPN Monitor”
6) Double click the icon with the two little red monitors next to your computer clock on the taskbar.
7) It’ll ask you if you want to run the Wingate Engine, CLICK OK.
8) A “Online Options” window will popup just click OK. It’ll tell you that you haven’t specified a password, just click “don’t ask me again” then click ok.
9) Start the damn Wingate engine if it asks you if you want to by clicking OK.
10) It’ll say some shit about GateKeeper needing a password, click OK and ENTER A PASSWORD YOU CAN REMEMBER then click OK.
11)Now click on “Services” Tab on the Bottom Left.
12) On the upper left right under the “Go Offline” Icon theres gonna be 4 things. Click on each one and press delete on you keyboard to delete the shits.
13) Right click on the empty white space where you deleted the services and press “New Service”, then “WWW Proxy Service”.
14) A window will popup….. Where it says “Service Port 80” (Right in front of you face) change that number to, well for this tutorial we will put it to “ 1111 “ (One Thousand, One Hundred, Eleven).
15) now to the left of that window click “Bindings”, Under binding policy UNCHECK “Bind to any IP ADDRESS…. Ect..”
16) now click “Gateways” to the left of the window.
17) on Connection scheme change it to “use blah blah blah on rotation” Now click on add.
18) you should see both your NIC card names, click the little plus sign bullshit to expand the tree and expand both “Gateways” and “Source IP addres.” And click on “Any Gateway” and “Any IP ADDRESS”. Click ok then click ADD AGAIN!!!! DO THE SAME SHIT WITH YOUR SECOND NIC CARD (INTERNET CONNECTION WHATEVER).
19)Now click APPLY, then OK, THEN YES.
20) your NAT PROXY should be working now…. So we are now going to test if you did all this shit right and both connections are Routed through the software proxy…
21) open up Internet Explorer, click on Tools, then Internet Options, then click connections, then click LAN SETTINGS. PUT A CHECK MARK ON “USE A PROXY SERVER FOR YOUR LAN ect….” And in Address TYPE IN 127.0.0.1 and in PORT TYPE IN 1111. CLICK OK THEN OK AGAIN.
22) Now goto IP Info - Find your IP address and check your IP ADDRESS. Keep Pressing REFRESH AND IF YOUR ip address DOES CHANGE (or Rotates) with your other IP ADDRESS YOU HAVE SETUP THE PROXY PERFECTLY.
partyanimal1989
Newbie
hey thanx netant bro/.......... that was quiet helpful...............now wat do we have to do i mean do we have to do somethin more after this................. i wanna use both d connectons for u torrent
