Possible to use the SIP/Voip from voice on FTTH with Freepbx or something similar?

[ttraj]

@varkey
I just checked in traffic in my router found that some source IP(10.191.60.68) level not reachable from router itself.

After Call establishment with SIP server IP(10.187.7.x). RTP using 10.191.x.x level.

I tried to attach 10.191.x.x to voice interface using static route still those IP not reachable. Searching for other options

 

[varkey]

Yes, I see the same. I needed to add 10.191.0.0/16 as a static route to go via the voice interface. I've attached my static routes. @ttraj

Had mentioned it earlier as well -- Possible to use the SIP/Voip from voice on FTTH with Freepbx or something similar? | BSNL FTTH Bharat Fiber Broadband

 

[ttraj]

Had mentioned it earlier as well -- Possible to use the SIP/Voip from voice on FTTH with Freepbx or something similar? | BSNL FTTH Bharat Fiber Broadband

Sorry i thought since BSNL moved to dhcp settings i thought its not needed

Route seems to be problem. somehow manage to make it work. now its working good. Will test more and update

@varkey Thanks for the suggestion

 

[satek]

Interesting @satek, I never looked at Asterisk. But setting BSNL as a trunk on Asterisk certainly sounds like a good plan.

I don't think you'd find a ready to use Asterisk config for BSNL.

Please do post here if you make good progress.

Asterisk found to be heavy for my ea4500 !! . So plan Asterisk on Openwrt

 

[satek]

@varkey On my GEnexis platinum 4410 ONT I can't configure Voice in bridge mode

 

[satek]

When I select mode to bridge it jumps to INTERNET

 

[varkey]

You don't need to select the service type as voice, cause if you are bridging, it doesn't matter. Select internet or other or something else.

 

[varkey]

@Chetan Thakur Yeah the issues you are seeing are due to NAT which breaks SIP. You need something similar to siproxd, you would ideally need to install siproxd on the device which does NAT, but that's not always possible. You could try this config

http://siproxd.sourceforge.net/siproxd_guide/siproxd_guide_c7s3.html

This means that you need another device where you can run siproxd

 

[RiCo]

I have Alphion AONT-1143. Has anyone with the same ONT been able to set up with GS Wave?

 

[icoolguy1995]

Hi everyone, I am looking to setup SIP using a router. Currently, I only have the default Syrotech device so now, I am planing to buy a router just for the SIP purpose. I am looking for the cheapest available router which supports openwrt and all the required stuff. Any suggestions?