Airtel refusing bridge mode without static IP

  • Thread starter Thread starter dynamitebr
  • Start date Start date
  • Replies Replies 26
  • Views Views 2,422
Messages
3
Location
Delhi
ISP
Airtel
Hello everyone, I have an Airtel Xstream broadband fiber connection and I'm trying to put it into bridge mode so that I can use my OpenWRT based GL.iNet Flint 2 router as my main router because it has very good range, inbuilt adblocker and VPN access features, among others.

Whenever I try to put my Airtel provided Huawei router/ONT into bridge mode and try to enter the PPPoE credentials into my Flint 2 (or an ethernet connected windows PC for that matter), the login always fails.

When I try to contact airtel for help they insist that I must get a static IP to get bridge mode, but I've been a long time lurker on this forum and I know that static mode has nothing to do with bridge mode, and that Airtel tries to upsell users to the static IP. I also know how dangerous static IPs can be if not firewalled properly.

I have some queries which I hope people on this forum can help me with -

1) just to make sure I'm not mistaken, airtel PPPoE password is the same as the account number right?

2) Do I need to do something like MAC-Address cloning on the OpenWRT router to make it work? Any other suggestions?

3) If this really is something that can only be enabled on their end, what is the best way to get in touch with someone knowledgeable at airtel who won't give me the runaround trying to upsell me the static IP? Or is bridge mode without static IP simply not possible anymore? Anybody try this within the last 2-3 months in Delhi?

I appreciate your time and effort to respond to this post!
 
I'm not in Delhi so I can't be sure about Airtel's staff competence in that region, but I got bridge mode enabled yesterday here in Chandigarh without a hitch and with no Static IP enabled. I hope I can give you some guidance, if not all in this matter:

1) Correct. PPPOE password is your account number which can be found in your ebill. ID can be found in your ONT's status page.

2) I'm not sure why you want to do this, but when I bridged the Airtel ZyXEL router with my own TP-Link AX10, I simply switched my router's connection settings to PPPOE mode and fed it the credentials. It started working without a hitch.

3) Yes, bridge mode can only be enabled by Airtel's NOC team. They have started locking down their routers hard so any efforts from your end are not gonna amount to anything. Additionally, their ground staff is instructed to try and sell a static IP if ever such a request is made, but if you counter them with confidence that is so not the case, they will usually comply as they are mostly knowledgeable to a basic degree only and tend to back away if they sense the customer has some if not better knowledge.

On the off chance however, if you find the visiting tech is egoistically belligerent, I advise you to ask him/her to leave, and then do the following:
  1. Send an email to net@airtel.com.
  2. Clearly state your request for bridge mode and specify that they inform you on what LAN port the bridge mode has been enabled on.
  3. Mention your DSL ID as well as preferred/registered number.
Typically Airtel should get back to you within a few hours(or days) and get your sorted out. Alternatively, you can also reach out to them via 121 and ask the CC executive to escalate your request directly, though having an email trail is better for your own reference purposes so you can cite it when escalating the matter to the Airtel's nodal officer, in case the NOC team decides to be problematic as well.

Hope this helps.
 
Last edited:
Thank you for such a well written and easy to understand answer! Both the Delhi ground team and the team at the 121 call center in Delhi totally refuse to escalate to the NOC team, one of them even put me on hold and I highly suspect he just transferred the call to his coworker who pretended to be NOC and insisted that there is no way to do it without Static IP.

The last thing I will try is to send an email at the address you suggested and see how it goes. If that does not work I will skip the nodal officer and just complain to TRAI. After that I will cancel not just that connection, but all my family's numbers as well as those of my employees (in the dozens). I will keep you posted here, once again thanks for your guidance!
 
@dynamitebr You don't need to contact them to enable bridge on Airtel Huawei ONT. Just create a new WAN profile enter 100 VLAN, Cos VLAN as 0 and change the mode to bridge and tick the exact port on which you want the bridge to be enabled and save it, you are good to go.
 
@RKhan21 it no longer works that way apparently, changing settings in the router like you suggested does nothing, PPPoE login via second router continues to fail. As a sanity check, I tried logging into PPPoE directly via a Windows machine connected to the port with bridge mode enabled, that failed too. The only way forward seems to be getting in touch with Airtel NOC which I've been procrastinating on. I will get on it today and let you folks know how it goes.
 
Hey, this is off topic but, where exactly did you purchased the GL.iNet Flint 2 from? and how much did it cost?
 
Unfortunately, until Airtel NOC enables bridge mode on their router's port(mine was LAN4), no amount of efforts are going to bear fruit. Though double NAT route is still an option, but it's not exactly a silver bullet for everything. They locked advanced settings for most routers down as far as I'm aware by pushing firmwares that automatically get installed on each restart.
 
@tr1k0N4 bro, i have the gx titanium router with an additional small box, another TP-Link router in access point mode (archer c6) and I was thinking of replacing the airtel router and small box with tp link xc220-g3v as I am getting strick nat. Airtel is such a pos, i am not even allowed to add a static ip address for the tp link router as it is locked, everything else is also locked in the airtel router.

Can you tell me if i need to enable bridge mode from airtel to use the tp link ont router?

I want to completely remove the airtel router, pos airtel app wont even allow me to change the wifi password on the app anymore, it says remote configuration is not allowed, and the stupid wifi name Airtel_ , I am sick of this.
 
Back