BSNL Broadband: Dlink Glb-502t Help Page

[harman163]

QUOTE(ashishv @ Sep 24 2006, 10:30 PM) [snapback]63179[/snapback]
D-Link model GLB-502T Truly sucks !!! It didnt work in PPPoe mode was able to use it as bridge and after reading various discussion boards i had to get it to the service centre where they patched the ADSL router.

They have removed my dsl MAC address after the patch it works (Finally) in PPPoe mode.

Before PATCH:
After PATCH
"If the facts don't fit the theory, change the facts."
[/b]
My modem is working fine now,they removed the dsl mac add.They sent me a batch file which removed the add.

 

[seshu]

^ @ harman , pls copy & paste that batch file herefor the benefit of other users . thanks .

 

[harman163]

This is a fix for D-Link GLB-502T PPPoE mode.

Please follow the following steps to update the settings of GLB-502T.Copy the folder to croot drive)

1. Note the mac id of your router which comprises of 12 digits (combination of numbers and alphabets)
Pasted separately on the bottom of your device.
eg. mac if of your device is "00:17:7C:00:1D:4F"
2. Open mac.txt file and make changes as follows

SEND "echo HWA_3 00:17:7C:01:1D:4F > env\m"

3. Replace the 8th digit of the mac id 0 with 1
4. Save changes to the file mac.txt file
5. Run mac.bat file
6. Reboot your router. Updation is complete.

Batch File

 

[MasterMind]

Hi Harman... I need this update as soon as possible... Your reply is bit confusing for me.. Do we supposed to save this text file as batch file or what..? Sorry for my low knowledge...

 

[seshu]

^ pls download the zip file given by Harman . it contains the text file , batch file & telnet scripting tool . then follow the instructions .

 

[MasterMind]

Oh... Right! I didn't see that link at the bottom... Thanks a lot seshu and last but not the least... Harman!

 

[vvjaishankar]

I have been facing similar issue of disconnections from PPPoE and bridge connection. I have got the modem last week and yesterday I have got a new piece from the service center at Chennai (Sep 2006 piece). I heard that the firmware was also an updated version.I am using USB option. Few minutes after getting the internet connection my PPPoE light goes off and I loose net conectivity. I have been using a different modem without any problems for hours or even days together which was provided by the service provider for monthly rental. I am planning to get it replaced with GLB-502T but running into trouble.Any suggestion on how to over come this problem or is it wise to get it replaced with a different brand. How about Netgear brand?Your earliest response is highly appreciated. Note: I have also tried the option mentioned by above (mac ID).

 

[harman163]

QUOTE(jaishankar @ Oct 1 2006, 03:19 PM) [snapback]63795[/snapback]
I have been facing similar issue of disconnections from PPPoE and bridge connection. I have got the modem last week and yesterday I have got a new piece from the service center at Chennai (Sep 2006 piece). I heard that the firmware was also an updated version.

I am using USB option. Few minutes after getting the internet connection my PPPoE light goes off and I loose net conectivity. I have been using a different modem without any problems for hours or even days together which was provided by the service provider for monthly rental. I am planning to get it replaced with GLB-502T but running into trouble.

Any suggestion on how to over come this problem or is it wise to get it replaced with a different brand. How about Netgear brand?

Your earliest response is highly appreciated.

Note: I have also tried the option mentioned by above (mac ID). [/b]
Can u plz post a screenshot of ur Product Information Page.Is ur Bridge mode is working fine.

 

[MasterMind]

QUOTE(jaishankar @ Oct 1 2006, 03:19 PM) [snapback]63795[/snapback]
Any suggestion on how to over come this problem or is it wise to get it replaced with a different brand. How about Netgear brand?
[/b]
^ The brand and the quality both are better than D-Link but the cost is almost double... What to do... Quality never comes cheap!

 

[daddykazaa]

QUOTE(harman163 @ Sep 26 2006, 05:58 PM) [snapback]63353[/snapback]
This is a fix for D-Link GLB-502T PPPoE mode.

Please follow the following steps to update the settings of GLB-502T.Copy the folder to croot drive)

1. Note the mac id of your router which comprises of 12 digits (combination of numbers and alphabets)
Pasted separately on the bottom of your device.
eg. mac if of your device is \"00:17:7C:00:1D:4F\"
2. Open mac.txt file and make changes as follows

SEND \"echo HWA_3 00:17:7C:01:1D:4F > env\m\"

3. Replace the 8th digit of the mac id 0 with 1
4. Save changes to the file mac.txt file
5. Run mac.bat file
6. Reboot your router. Updation is complete.

Batch File
[/b]

I have just applied this patch, now lets see if it works or not.